Broan RM523604 manual Install, Hood

INSTALL THE
			LEVEL	MOUNTING			WALL FRAMING
HOOD			SCREWS		SCREWS
			(3.9x9.5mm)	(4.8x38mm)
Note: at least two people			MOUNTING
will be required to mount
			SCREWS
the hood.
			(4.8x38mm)
1. Raise	the hood into its						MOUNTING
							BRACKET
mounting position.
2. Plug the power cord into
the	electric	wall					RECTANGULAR
receptacle.		Tuck					CUTOUT
excess cord behind the
flue.
3. Align	the rectangular							FIG. 9
opening on the back of the hood with the
wall-mounting bracket. Gently lower the						3.9x9.5mm	ELECTRICAL
hood until it securely engages the bracket.
							SYSTEM
						SCREWS
Fig. 9							PLATE

4.	Level the hood with (2) screws
	(3.9x9.5mm) and secure with (4)
	mounting screws (4.8x38mm). Use
	drywall anchors provided if wall studs or
	framing are not available. Fig. 9
5.	Secure the electrical system plate to the
	range hood with (2) mounting screws
	(3.9x9.5mm). Fig. 10
6.	Raise the upper flue until its holes align
	with holes in the flue mounting bracket
	(located on ceiling). Fig. 11
7.	Secure the flue with (2) mounting screws	FIG.10
	(3.9x9.5mm). Fig. 11
		3.9x9.5mm
		MOUNTING SCREWS
		FIG.11

- 9 -