Blodgett SN-5G manual Cold Water Condenser, Water Conditioning

Page 10

COLD WATER CONDENSER

The steamer is equipped with a cold water condenser in the rear of the cooking chamber which helps to condense the steam prior to discharge into drain. The steamer freely vents itself by the negative pressure created by the condensate water drainage. This negative pressure prevents steam leakage around the door gasket and helps draw the steam through the cooking compartment. Steam leakage at the door may indicate a plugged or improperly installed drain.

WATER CONDITIONING

It is important that the water supply connected to this steamer be softened to no more than 2.0 grains of hardness and have a pH of 6 to 7.5. This degree of hardness can be easily obtained with the use of a properly maintained water softener. The use of a water meter will determine the water consumption and when the water softener needs regeneration or recharging. Failure to comply with these water condition standards may void the warranty.

Untreated water contains scale producing minerals which can precipitate onto the surfaces in the boiler. Due to the temperatures in the boiler, the minerals can bake onto the surfaces and components. This can result in early component failure and reduced product life. Water level probes become coated with scale. Scale will bridge across the probe insulator from the metal extension which senses the water level in the boiler shell. Once this scale becomes wet, the water level control is unable to maintain the proper water level in the boiler.

STRAINERS and FILTERS will NOT remove minerals from the water.

10

Image 10
Contents SN-5G, SC-7G and SC-10G Important Notes for Installation and Operation Table of Contents Service Connections SN-5G Water Quality StatementService Connections SC-7G and SC-10G Model GAS SupplyInstallation General Exhaust Fans and CanopiesWall Exhaust FAN To InstallClearances GAS Connection VAC-60 Hz-Single Phase Drain Connections FigureCold Water Condenser Water ConditioningPerformance Check Operation Instructions ControlsShutdown Stand by LightingComplete Shutdown PAN Steam CookingPreparation Number of Pans Depth SN-5G SC-7GPeriodic Maintenance Cleaning Monthly Weekly, or more often if necessaryNever Spray Water Into Electric Controls To Remove Heat Tint Maintenance Stainless SteelRUB with a Circular Motion Removal of Scale DepositsDeliming Procedure For units equipped with this feature USEBurner does not come on TroubleshootingBurner produces carbon deposits Water accumulates in the compartment Water flows into cooking compartmentDoor leaks Water flows into drain during shut down