Inspection for Shipping Damage

Gas Rotisserie Oven	Installation

Installation

It is the owners’ responsibility to file all freight claims with the delivering truck line. Inspect all cartons and crates for damage as soon as they arrive. If damage to cartons or crates is found, or if a shortage is found, note this on the bill of lading (all copies) prior to signing.

If damage is found when the equipment is opened, immediately call the delivering truck line and follow up the call with a written report indicating concealed damage to your shipment. Ask for an immediate inspection of your concealed damage item. Packaging material MUST be retained to show the inspector from the truck line.

Preparation

There are several things the installer must know before installing the oven. These are listed below:

When using natural gas, the supply pressure must never drop below 7 inches of water column. If the supply pressure can exceed 14 inches of water column, a pressure regulator must be used. This regulator must be sized to ensure that the pressure never goes below 7 inches of water column while the unit is in operation.

•The oven installation must conform with city or county standards for gas appliances and gas piping. If your area does not have local codes, consult the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1. In Europe, city and country codes are enforced.

Do not attempt to test the gas pressure of your oven. Pressure testing should be done only by an authorized Service Agent.

•During any pressure testing of the gas supply system, the oven must be protected. The oven and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa). The oven must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

•The oven must be electrically grounded to conform with the local code of your city or county. If your area does not have local codes, consult the latest version of the National Electrical Code ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2. In EUROPE, city and country codes are enforced.

•A schematic diagram of the unit is located inside the control cabinet.

•The Authorized Service Agent that installs your oven must connect the cord set at the rear of the oven to an electrical source with a voltage matching that stamped on the name and rating tag. Refer to the wiring diagrams in this manual.

•Make sure a connector is used that complies with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69 • CSA 6.16.

•Make sure a quick-disconnect device is used that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI Z21.41 • CSA 6.9.

•In Europe, the installer must supply the gas supply connector.

DRG-40 specifications

The Bakers Pride Oven DRG-40 stands out as a culinary powerhouse, specifically designed for commercial kitchens that demand high performance and versatility. This double-deck, gas-powered oven combines innovative technology with rugged construction, ensuring it meets the rigorous needs of bakers and chefs alike.

One of the primary features of the DRG-40 is its high-efficiency design. The oven is equipped with a durable stainless steel exterior that not only enhances its aesthetic appeal but also provides excellent durability and easy maintenance. Inside, it boasts a spacious cooking chamber with a total cooking surface area that allows for multiple pizza and bread pans, making it perfect for high-demand environments. The double-deck setup enables simultaneous baking, significantly increasing productivity.

Temperature control is another standout aspect of the DRG-40. The oven features precise thermostatic controls that allow operators to set and maintain accurate temperatures, from baking low-temperature breads to achieving the perfect pizza crust. The independent top and bottom heat controls further enhance the versatility, giving chefs the ability to customize baking conditions for different products.

In addition to its robust heating capabilities, the DRG-40 incorporates advanced airflow technology. This ensures even heat distribution within the cooking chamber, minimizing hot spots and guaranteeing uniform results across all baking trays. Such consistent performance is crucial for maintaining quality and customer satisfaction in a fast-paced kitchen.

Another notable characteristic of the Bakers Pride Oven DRG-40 is its ease of use. It features heavy-duty doors that swing open smoothly, providing easy access to the oven's interior. The included baking stones are designed for optimal heat retention, enhancing the quality of baked goods. Furthermore, the oven operates with a simple gas connection, making it relatively easy to install and integrate into existing kitchen layouts.

Safety features, such as an automatic shut-off system and robust construction, ensure that the DRG-40 can be trusted in busy environments. Its compact design allows it to fit into smaller spaces without compromising on capacity or performance.

In summary, the Bakers Pride Oven DRG-40 is an ideal choice for pizzerias, bakeries, and other food service establishments looking for a reliable and powerful baking solution. With its combination of advanced technology, rugged construction, and user-friendly features, this oven is designed to meet the demands of modern commercial kitchens while delivering exceptional baking results. Whether you are baking artisanal bread, pizza, or pastries, the DRG-40 is built to excel in every aspect of the baking process.