Zanussi ZSF 6280 manual Selecting the dishwashing cycle Cycle Table

Selecting the dishwashing cycle (Cycle Table)

				Programme				Consumption
				sequence					values2)
Dishwashing	Suitable	Type of			Intermediate rinse			Length (minutes)		Energy (kWh)
cycle1)	for:	soiling		Main wash		Final rinse					Water (litres)
			Pre-wash				Drying
AUTOMATIC	Dinner service	normally soiled,	•	•	2x	•	•	120		1,60	24
(50° - 65°)*3)	and cookware	dried-on food remains			1 to			100 -		1,10 -	12 -
EAT-LOAD-RUN	Dishes, exclud-	just used, lightly to nor-	-	•	-	•	-	30		0,8	9
(60°)4)	ing saucepans	mally soiled
		heavily soiled,						120 - 130		1,85 - 2,05	22 - 24
70° INTENSIVE*	Dinner service	dried-on food remains, in	•	•	2x	•	•
	and cookware	particular protein and
		starch
	Dinner service							160		1,05
ENERGY	and cookware,										14
	temperature-	normally soiled	•	•	•	•	•
(50°)5)								-		-	-
								130		0,95	12
	sensitive crock-
	ery
	Dessert dishes
45° GLASS	and coffee serv-	lightly soiled	-	•	2x	•	•	73		0,9	14
	ice, delicate
	glassware
		Used dishes that are being
PREWASH	All types of dish-	stored in the dishwasher	•	-	-	-	-	12		< 0,1	4
(cold)6)	es	and are to be washed lat-
		er.

1)In all dishwasher programmes with a *, during the final rinse the temperture is raised to 68° for 10 minutes to hygienically clean e.g. plastic chopping boards or jam jars.

2)The consumption values were obtained under standardised conditions. They depend on how full the baskets for the dishes are. Variations are therefore possible in practice.

3)When using this cycle the degree of water clouding determines the amount of soiling on the dishes. The length of the cycle and water and energy consumption can vary greatly – depending upon the load and how dirty the dishes are. Depending upon the soiling, the temperature of the water will be automatically adjusted to between 50°C and 65°C.

4)When using this cycle, only load the dishwasher half full.

5)Test programme for Test Institutes

6)This cycle does not need any detergent.

23