Zanussi ZSF 6280 manual Starting a Dishwashing Cy- cle, Setting the Delay Timer

Page 25

Starting a Dishwashing Cy- cle

1.Check that the spray arms can turn freely.

2.Turn the water tap on fully.

3.Close the door.

4.Press the ON/OFF button.

5.Using the Program button, select the desired pro- gramme.

The name of the dishwashing cycle that is currently selected flashes.

To the right of the name the estimated duration of the cycle is displayed.

6.Press the Ok/Start button.

The selected dishwashing cycle will begin. In the text line of the display you will see the name of the cur- rent programme stage. Next to this you will see the estimated remaining duration in minutes.

Using the Options button you can briefly display the name of the dishwashing cycle in the display.

3A dishwashing cycle can only be started from the Programmes menu.

3During the dishwashing cycle, the remaining time shown in the display may be adjusted ac- cording to the size of the load, degree of soil- ing, etc.

If the dishwashing cycle does not start:

If after pressing the Ok/Start button, the programme does not start and a message appears in the display (REFILL RINSE AID, REFILL SALT or PLEASE CLOSE DOOR):

•Follow the instructions in the message.

After the problem has been remedied, the cycle starts automatically.

3With the messages REFILL RINSE AID or RE- FILL SALT you can however start the cycle, by pressing the Ok/Start button again.

3While a dishwashing cycle is running, you can- not change the options or settings.

Interrupting or Cancelling a dish- washing cycle

Interrupt a dishwashing cycle that is in progress if it is absolutely necessary.

Interrupting the dishwashing pro- gramme by opening the dishwasher door

1 Hot steam may escape when the door is opened. There is a risk of scalding.

1.Open the door carefully. The dishwashing cycle will stop, in the display: PLEASE CLOSE DOOR

2.Close the door. The cycle will continue.

Cancelling the dishwashing cycle

1.Press the Cancel button.

In the display: CONFIRM CANCEL ?

2.Press the Ok/Start button.

The programme is cancelled. In the display:

CHOOSE PROGRAMME

3.If you want to start a new dishwashing cycle, check whether there is any detergent in the dis- penser.

3Turning off the dishwasher will only interrupt a selected dishwashing cycle, not cancel it. The cycle will recommence after turning the dish- washer back on again.

Setting the Delay Timer

3With the delay timer you can delay the start of a dishwashing cycle for between 1 and 19 hours. First set the Delay Start and then the desired dishwashing cycle.

1.Press the Delay Start button repeatedly until the desired period by which you want to delay the start is displayed in the display.

lights up in the symbol line of the display.

2.Select and start dishwashing cycle.

First the pre-set time delay counts down. In the dis- play you will see START IN and the time remaining until the start of the dishwashing cycle. After the time delay the dishwashing cycle begins automatically, the symbol goes out.

Cancelling a delay start:

You can cancel a delay start that is counting down at any time.

1.Press the Cancel button.

In the display: CONFIRM CANCEL ?

2.Press the Ok/Start button.

The delay start is cancelled. The dishwasher cycle that is set begins.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents ZSF Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyDishwasher door safety catch Control Panel Diagram of ApplianceSwitching on for the first time setting the language Display Basic operation Settings sub-menuProgrammes menu Options menuAdjusting an option/setting Prior to Using for the First TimeSetting the Water Softener Setting manuallyWater hardness Adjusting the hardness setting Setting electronicallyRange Manual Electronic Adding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Setting the acoustic signalLoading cutlery and dishes Daily useLoading cutlery Pots, Pans, Large Plates Cups, Glasses, Coffee ServicePage Raising / Lowering the upper basket Adjusting the Height of the Upper BasketMaximum height of dishes Upper basket Lower basketAdding Detergent Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Interrupting or Cancelling a dish- washing cycle Setting the Delay TimerStarting a Dishwashing Cy- cle Button lock Switching Off the dish- washerRemoving the Dishes Cleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm What to do if … Resetting the languageRemedying small malfunc- tions Malfunction Possible cause RemedyLong warning tone can be BlockedDishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesPackaging material DisposalOld appliance Dishwasher Free-standing appliances Technical dataUpper basket Sample loading arrangementsSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureExtension hoses Anti-flood systemSink outlet connection Water drainage if the dishwasher is built- in at high levelChanging a fuse Electrical ConnectionConnecting systems Customer Care Department 0870 5 929822 612 Subject to change without notice
Top Page Image Contents