Zanussi ZSF 6280 manual Setting the acoustic signal, Setting the Amount of Rinse Aid Required

Page 14

Setting the Amount of Rinse Aid Required

3Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dish- washing results are not satisfactory”.) The dosage can be set from 1-6. The dosage is pre-set to “4” in the factory.

1.Open the dishwasher door.

2.Press the release button on the rinse aid compart- ment.

3.Open the cover.

4.Set the dosage level.

5.Press the lid shut until it clicks into place.

6.If rinse aid has leaked out, wipe it away with a cloth.

Setting the acoustic signal:

In addition to the optical display (e.g. indicating the end of the cycle, errors) you can also choose to set an acoustic signal.

1.Press the ON/OFF button.

3If the name of a programme stage is displayed in the display, a dishwashing cycle is active. First of all you must cancel the dishwashing cycle:

–Press the Cancel button. CONFIRM CANCEL? appears in the display.

–Press the Ok/Start button. This cancels the dish- washing cycle.

2.To go the BUZZER setting; see section “Adjusting an option/setting”.

3.To switch audible beep (BUZZER) on or off.

When the audible beep is switched off, the symbol is lit in the display.

14

Image 14

Contents ZSF Following symbols are used in the text Dear CustomerContents Child Safety SafetyPrior to using for the first time General SafetyDishwasher door safety catch Diagram of Appliance Control PanelSwitching on for the first time setting the language Display Programmes menu Settings sub-menuBasic operation Options menuSetting the Water Softener Prior to Using for the First TimeAdjusting an option/setting Setting manuallyRange Manual Electronic Setting electronicallyWater hardness Adjusting the hardness setting Only when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the acoustic signal Setting the Amount of Rinse Aid RequiredDaily use Loading cutlery and dishesLoading cutlery Cups, Glasses, Coffee Service Pots, Pans, Large PlatesPage Maximum height of dishes Adjusting the Height of the Upper BasketRaising / Lowering the upper basket Upper basket Lower basketAdding Detergent Concentrated detergents Detergent tabletsIf you do not want to use 3in1 products any more Using 3in1 detergentsIf you want to use 3in1 products If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Starting a Dishwashing Cy- cle Setting the Delay TimerInterrupting or Cancelling a dish- washing cycle Removing the Dishes Switching Off the dish- washerButton lock Care and cleaning Cleaning the filtersCleaning the spray arm jets Upper basket spray armBottom spray arm Remedying small malfunc- tions Resetting the languageWhat to do if … Malfunction Possible cause RemedyBlocked Long warning tone can beDishes do not dry and are not shin- ing If the Dishwashing Results are not SatisfactoryDishes are still dirty There are dried water drops on the glass- es and dishesOld appliance DisposalPackaging material Technical data Dishwasher Free-standing appliancesSample loading arrangements Upper basketSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting the inlet hose Connecting the dishwasherConnecting to the water supply Permitted water pressureSink outlet connection Anti-flood systemExtension hoses Water drainage if the dishwasher is built- in at high levelElectrical Connection Changing a fuseConnecting systems 0870 5 929 Customer Care Department822 612 Subject to change without notice