Zanussi ZSF 6280 manual Basic operation, Programmes menu, Options menu, Settings sub-menu

Page 9

Basic operation

This section contains basic information regarding the use of your dishwasher. Please read this section very carefully.

Programme menu

			AUTOMATIC



			EAT-LOAD-RUN
Programbutton

			70° INTENSIVE
			70° INTENSIVE


			ENERGY


			45° GLASS


			PREWASH

The Programmes menu

•After switching on the dishwasher, you will find yourself in the Programmes menu.

•Select your dishwashing cycle here using the Pro- gram button. In the Info status bar your current po- sition within the menu is shown.

The Options menu

•Using the Options button, go to the desired option. In the Info status bar your current position within the menu is displayed.

•For more detail about the options, refer to the re- spective sections; for more about the 3 IN 1 op- tion, see the section “Before using the appliance for the first time”.

•Use the Ok/Start button to switch from the menu item SETTINGS… to the Settings sub-menu.

The Settings sub-menu

Go to the desired setting here using the Options but- ton. In the Info status bar your current position within the sub-menu is shown.

• LANGUAGE

Set the language of the text line in the display; see also section “Resetting the language”.

Options menu

			3 IN 1
	button Options

			KEY LOCK
			KEY LOCK

		SETTINGS…
		button
		Ok/Start
		LANGUAGE
	button Options	WATER HARDNESS
	button Options	RINSE AID
		RINSE AID
		BUZZER

•WATER HARDNESS

Set the value for water hardness electronically (val- ue range 1 to 10).

•RINSE AID

If 3 IN 1 option is active: Activate or deactivate rinse aid inflow

If 3 IN 1 option is not active: Rinse aid inflow is al- ways switched on, even if with RINSE AID the val- ue OFF is selected.

•BUZZER

Activate or deactivate audible beep

3Using the Cancel button you can get back from any setting to the 3 IN 1 option.

9

Image 9

Contents ZSF Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyDishwasher door safety catch Control Panel Diagram of ApplianceSwitching on for the first time setting the language Display Basic operation Settings sub-menuProgrammes menu Options menuAdjusting an option/setting Prior to Using for the First TimeSetting the Water Softener Setting manuallySetting electronically Water hardness Adjusting the hardness settingRange Manual Electronic Adding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Setting the acoustic signalLoading cutlery and dishes Daily useLoading cutlery Pots, Pans, Large Plates Cups, Glasses, Coffee ServicePage Raising / Lowering the upper basket Adjusting the Height of the Upper BasketMaximum height of dishes Upper basket Lower basketAdding Detergent Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Setting the Delay Timer Interrupting or Cancelling a dish- washing cycleStarting a Dishwashing Cy- cle Switching Off the dish- washer Button lockRemoving the Dishes Cleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm What to do if … Resetting the languageRemedying small malfunc- tions Malfunction Possible cause RemedyLong warning tone can be BlockedDishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesDisposal Packaging materialOld appliance Dishwasher Free-standing appliances Technical dataUpper basket Sample loading arrangementsSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureExtension hoses Anti-flood systemSink outlet connection Water drainage if the dishwasher is built- in at high levelChanging a fuse Electrical ConnectionConnecting systems Customer Care Department 0870 5 929822 612 Subject to change without notice