Zanussi ZSF 6280 manual Electrical Connection, Changing a fuse

Page 41

Electrical Connection

Any electrical work required to install this appli- ance should be carried out by a qualified electri- cian or competent person.

1 WARNING - This appliance must be earthed.

The manufacturer declines any responsibil- ity should these safety measures not be ob- served.

Before switching on make sure the electricity supply voltage is the same as that indicated on the appli- ance rating plate.

To isolate the dishwasher from the mains, remove the mains plug.

Important: The plug must still be accessible after the appliance has been installed.

Changing a fuse

The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS 1363A) fuse must be used.

Should the plug need to be replaced for any reason,

Green & Yellow

 

proceed as described below.

 

 

The wires on the mains lead are coloured in accord-

 

ance with the following code.

 

 

Green and Yellow:

Earth

 

Blue:

Neutral

 

Brown:

Live

 

Blue

Brown

• The wire coloured green and yellow must be con-

 

nected to the terminal marked with the letter “E“ or

 

by the earth symbol E or coloured green and yel-

Cord Clamp

low.

The wire coloured blue must be connected to the terminal “N“ or coloured black.

The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1 WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) haz- ard. Ensure that, if it is necessary to cut off the plug, it is disposed of safely and not re- tained.

41

Image 41
Contents ZSF Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyDishwasher door safety catch Control Panel Diagram of ApplianceSwitching on for the first time setting the language Display Basic operation Settings sub-menuProgrammes menu Options menuAdjusting an option/setting Prior to Using for the First TimeSetting the Water Softener Setting manuallyRange Manual Electronic Setting electronicallyWater hardness Adjusting the hardness setting Adding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Setting the acoustic signalLoading cutlery and dishes Daily useLoading cutlery Pots, Pans, Large Plates Cups, Glasses, Coffee ServicePage Raising / Lowering the upper basket Adjusting the Height of the Upper BasketMaximum height of dishes Upper basket Lower basketAdding Detergent Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Starting a Dishwashing Cy- cle Setting the Delay TimerInterrupting or Cancelling a dish- washing cycle Removing the Dishes Switching Off the dish- washerButton lock Cleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm What to do if … Resetting the languageRemedying small malfunc- tions Malfunction Possible cause RemedyLong warning tone can be BlockedDishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesOld appliance DisposalPackaging material Dishwasher Free-standing appliances Technical dataUpper basket Sample loading arrangementsSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureExtension hoses Anti-flood systemSink outlet connection Water drainage if the dishwasher is built- in at high levelChanging a fuse Electrical ConnectionConnecting systems Customer Care Department 0870 5 929822 612 Subject to change without notice