Zanussi ZSF 6280 manual If the Dishwashing Results are not Satisfactory, Dishes are still dirty

Page 32

If the Dishwashing Results are not Satisfactory

The dishes are still dirty.

The wrong dishwashing cycle was selected.

The dishes were loaded is such a way that the dishwashing water did not reach all items. The baskets for the dishes must not be overloaded.

The filters in the base of the washing compartment are dirty or incorrectly positioned.

Good quality detergent was not used, or too little was used.

In the case of scale deposits on the dishes: The dishwasher salt dispenser is empty or the water softening system has been incorrectly set.

The drain hose is incorrectly positioned.

Pollutants from the water in the dishwasher can block the jets in the spray arms. You have the op- tion of removing the spray arms from their fixture for cleaning (see section “Care and Cleaning”).

The dishes do not dry and are not shin- ing.

Poor quality rinse aid was used.

The rinse aid dispenser is empty.

There are smears, streaks, milky spots or a shiny bluish coating on glasses and dishes.

Lower rinse aid dosage.

There are dried water drops on the glass- es and dishes.

Increase rinse aid dosage.

The detergent may be the cause. Contact the de- tergent manufacturer's customer advice centre.

Glass corrosion

Contact the detergent manufacturer's customer advice centre.

32

Image 32
Contents ZSF Following symbols are used in the text Dear CustomerContents Safety Prior to using for the first timeChild Safety General SafetyDishwasher door safety catch Diagram of Appliance Control PanelSwitching on for the first time setting the language Display Settings sub-menu Basic operationProgrammes menu Options menuPrior to Using for the First Time Adjusting an option/settingSetting the Water Softener Setting manuallyRange Manual Electronic Setting electronicallyWater hardness Adjusting the hardness setting Only when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the acoustic signal Setting the Amount of Rinse Aid RequiredDaily use Loading cutlery and dishesLoading cutlery Cups, Glasses, Coffee Service Pots, Pans, Large PlatesPage Adjusting the Height of the Upper Basket Raising / Lowering the upper basketMaximum height of dishes Upper basket Lower basketAdding Detergent Concentrated detergents Detergent tabletsUsing 3in1 detergents If you want to use 3in1 productsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Starting a Dishwashing Cy- cle Setting the Delay TimerInterrupting or Cancelling a dish- washing cycle Removing the Dishes Switching Off the dish- washerButton lock Care and cleaning Cleaning the filtersCleaning the spray arm jets Upper basket spray armBottom spray arm Resetting the language What to do if …Remedying small malfunc- tions Malfunction Possible cause RemedyBlocked Long warning tone can beIf the Dishwashing Results are not Satisfactory Dishes are still dirtyDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesOld appliance DisposalPackaging material Technical data Dishwasher Free-standing appliancesSample loading arrangements Upper basketSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting the dishwasher Connecting to the water supplyConnecting the inlet hose Permitted water pressureAnti-flood system Extension hosesSink outlet connection Water drainage if the dishwasher is built- in at high levelElectrical Connection Changing a fuseConnecting systems 0870 5 929 Customer Care Department822 612 Subject to change without notice