Zanussi ZSF 6280 manual What to do if …, Resetting the language, Remedying small malfunc- tions

Page 30

What to do if …

Resetting the language

You can reset the language of the display to the fac- tory setting at any time.

1.Press the Cancel button repeatedly until what is shown in the display no longer changes.

2.Press and hold the Cancel button for six seconds.

LANGUAGE ENGLISH appears in the text line. The word ENGLISH flashes.

3.Using the Options button, select the desired lan- guage.

4.Press the Ok/Start button.

Remedying small malfunc- tions

If one of the following fault messages is displayed in the display during operation:

–OPEN THE TAP

–DRAIN BLOCKED

Remedy the fault, then re-start the dishwashing cy- cle. The cycle will continue.

In the case of other fault messages:

–Cancel the dishwashing cycle.

–Switch the appliance off and on again.

–Select dishwashing cycle.

–Press the Ok/Start button.

If the fault is displayed again, please contact the Service Force Centre and inform them of the fault message.

Malfunction

Possible cause

Remedy

 

 

 

 

Tap is blocked with limescale or is

Check the tap and have it repaired, if

 

faulty.

necessary.

 

 

 

 

The tap is turned off.

Turn on the tap.

 

 

 

 

The filter (where present) in the

Clean the filter in the threaded hose

 

threaded hose fitting on the tap is

 

fitting.

1 short warning tone, continu-

blocked.

 

ously repeated, can be heard,

 

 

 

Cancel the dishwashing cycle (see

in the display: OPEN THE TAP

 

Filters in the base of the washing

chapter: Starting a dishwashing cy-

 

 

cle);

 

compartment are blocked.

 

clean filters (see chapter: Cleaning

 

 

 

 

the filters).

 

 

 

 

Water inlet hose has not been cor-

Check the position of the hose.

 

rectly positioned.

 

 

 

 

 

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents ZSF Following symbols are used in the text Dear CustomerContents Child Safety SafetyPrior to using for the first time General SafetyDishwasher door safety catch Diagram of Appliance Control PanelSwitching on for the first time setting the language Display Programmes menu Settings sub-menuBasic operation Options menuSetting the Water Softener Prior to Using for the First TimeAdjusting an option/setting Setting manuallySetting electronically Water hardness Adjusting the hardness settingRange Manual Electronic Only when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the acoustic signal Setting the Amount of Rinse Aid RequiredDaily use Loading cutlery and dishesLoading cutlery Cups, Glasses, Coffee Service Pots, Pans, Large PlatesPage Maximum height of dishes Adjusting the Height of the Upper BasketRaising / Lowering the upper basket Upper basket Lower basketAdding Detergent Concentrated detergents Detergent tabletsIf you do not want to use 3in1 products any more Using 3in1 detergentsIf you want to use 3in1 products If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table Selecting a programme Setting the Delay Timer Interrupting or Cancelling a dish- washing cycleStarting a Dishwashing Cy- cle Switching Off the dish- washer Button lockRemoving the Dishes Care and cleaning Cleaning the filtersCleaning the spray arm jets Upper basket spray armBottom spray arm Remedying small malfunc- tions Resetting the languageWhat to do if … Malfunction Possible cause RemedyBlocked Long warning tone can beDishes do not dry and are not shin- ing If the Dishwashing Results are not SatisfactoryDishes are still dirty There are dried water drops on the glass- es and dishesDisposal Packaging materialOld appliance Technical data Dishwasher Free-standing appliancesSample loading arrangements Upper basketSafety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting the inlet hose Connecting the dishwasherConnecting to the water supply Permitted water pressureSink outlet connection Anti-flood systemExtension hoses Water drainage if the dishwasher is built- in at high levelElectrical Connection Changing a fuseConnecting systems 0870 5 929 Customer Care Department822 612 Subject to change without notice
Top Page Image Contents