Zanussi ZDT40 user manual Filling with rinse aid

Page 11

IMPORTANT!

The salt container will require topping up periodically.

The salt cap has a refill indicator window in the centre in which a green float is clearly visible when there is salt inside the container and almost disappears when the salt has finished.

Filling with rinse aid

Open the lid.	Fill up with rinse aid. The
	maximum level for filling is
	indicated by "max"

Clean up any rinse aid which overflows. Close the lid and press until it locks.

CAUTION!

Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Top up the rinse aid indica- tor (B) becomes clear

11

Image 11

Contents ZDT40 Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationRelease the Programme selection/Can- cel button Setting modeIndicator lights Audible signalsType of load Washing programmesFirst use Degree of soilUse of salt Set the water softenerClarke Water hardness Mmol/l Water hardness Clarke Mmol/l Setting the water softener manually see tableSetting the water softener electronically see table Use only special salt suitable for dishwashers Use of dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketDetergent tablets Use of detergentUnloading the dishwasher Cleaning the filters Care and cleaningEnvironment concerns Packaging material Fault code and malfunctionPossible cause and solution What to do if…Wash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 12 standard place settingsInlet hose InstallationWater connection Electrical connection Drain hoseLevelling Fitting under a counterPage Page Page 156991210-00-29112007