Zanussi ZDT40 user manual Use of detergent, Unloading the dishwasher, Detergent tablets

Page 15

Use of detergent

IMPORTANT!

Only use detergents suitable for dishwashers.

Observe the manufacturer’s dosing and stor- age recommendations.

Open the lid.	Fill in the detergent in	Observe the dosing lev-
	compartment A.	els.

For programmes with pre-	When using detergent	Close the lid.
wash add an additional	tablets: place detergent
detergent dose in com-	tablets in compartment A.
partmentB.

Detergent tablets

Detergent tablets from different manufacturers dissolve at different rates. For this reason, some detergent tablets do not attain their full

cleaning power during short washing pro- grammes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals.

Unloading the dishwasher

•Hot dishes are sensitive to knocks.

The dishes should therefore be allowed to cool down before removing from the appli- ance.

•Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

15

Image 15

Contents ZDT40 Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationRelease the Programme selection/Can- cel button Setting modeIndicator lights Audible signalsType of load Washing programmesFirst use Degree of soilSet the water softener Clarke Water hardness Mmol/lUse of salt Setting the water softener manually see table Setting the water softener electronically see tableWater hardness Clarke Mmol/l Use only special salt suitable for dishwashers Use of dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketUse of detergent Unloading the dishwasherDetergent tablets Cleaning the filters Care and cleaningEnvironment concerns Packaging material Fault code and malfunctionPossible cause and solution What to do if…Wash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 12 standard place settingsInstallation Water connectionInlet hose Electrical connection Drain hoseLevelling Fitting under a counterPage Page Page 156991210-00-29112007