Installation
WARNING!
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person.
Water connection
WARNING!
The dishwasher must not be connected to open water appliances or instantaneous water heat-
Inlet hose
Connect the inlet hose to a water tap with an external thread of 3/4”.
The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.
22
ers. This dishwasher must be fed with cold water.
WARNING!
Only use, for connection to the water mains, new
CAUTION!
If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes be- fore connecting the inlet hose.