Setting mode
The appliance is in setting mode when all programme lights are off and End of pro- gramme light flashes.
IMPORTANT!
Always remember that when performing opera- tions such as:
•selecting a washing programme
•setting the water softener
•deactivation/activation of the audible signals
Programme selection/cancel button
the appliance MUST be in setting mode.
If a programme light is illuminated and End of programme light is illuminated with fixed light, the last performed programme is still set.
In this case the programme has to be cancelled:
1.Press and hold the Programme selection/ Cancel button until the light of the running programme turns off and the End of pro- gramme light is flashing.
2.Release the Programme selection/Can- cel button.
•Starting the washing programme:
1.Press the
2.Press the Programme selection/cancel button once, the light of the last performed washing pro- gramme illuminates and the End of programme light flashes.
3.Press the Programme selection/cancel button as many times as necessary to illuminate the light corresponding to the desired programme.
4.Close the dishwasher’s door, the programme will start automatically.
IMPORTANT!
Once the programme has started, if you want to change the selection made you must cancel the wash- ing programme in progress.
•Cancel the washing programme in progress:
1.Open the door.
2.Press and hold the Programme selection/cancel button until the light of the running programme turns off and the End of programme light is flash- ing.
3.Release the Programme selection/cancel but- ton.
4.Switch off the machine by pressing the
5