Zanussi ZDT40 user manual Hints for test institutes, Full load 12 standard place settings

Page 21

Capacity	place settings
Max. weight	kg
Noise level	dB(A)

Hints for test institutes

12

37

51

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and us- ing the test programme (see "Consumption values").

Test in accordance with EN 50242 must be carried out when the salt container and rinse

aid dispenser have been filled with salt and rinse aid respectively and using the test pro- gramme (see "Consumption values").

Full load: 12 standard place settings

Amount of detergent required Rinse aid setting

5 g + 25 g (Type B) position 4 (Type III)

Upper basket

Cutlery basket

Lower basket

cup racks: position A

21

Image 21

Contents ZDT40 Contents General safety Safety informationChild safety Correct useControl panel InstallationRelease the Programme selection/Can- cel button Setting modeIndicator lights Audible signalsFirst use Washing programmesDegree of soil Type of loadSet the water softener Clarke Water hardness Mmol/lUse of salt Setting the water softener manually see table Setting the water softener electronically see tableWater hardness Clarke Mmol/l Use only special salt suitable for dishwashers Use of dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketUse of detergent Unloading the dishwasherDetergent tablets Cleaning the filters Care and cleaningEnvironment concerns Possible cause and solution Fault code and malfunctionWhat to do if… Packaging materialWash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 12 standard place settingsInstallation Water connectionInlet hose Electrical connection Drain hoseLevelling Fitting under a counterPage Page Page 156991210-00-29112007