1.Press the On/Off button. The dishwasher must be in setting mode.
2.Simultaneously press and hold function buttons B and C until the lights of the func- tion buttons A, B and C start flashing.
3.Press function button A, the lights function buttons B and C turn off while the light of function button A goes flashing, at the same time the end of programme indica- tor light starts to flash, along with a se- quence of intermittent audible signals. The current level is indicated by the number of flashes of the end of programme indicator light with a sequence of intermittent audible signals and a pause of a few seconds.
Examples:
5 flashes / 5 intermittent audible signals, pause,
5 flashes / 5 intermittent audible signals, pause, etc...= level 5
6 flashes / 6 intermittent audible signals, pause,
6 flashes / 6 intermittent audible signals, pause, etc...= level 6
4.To change the level press the function but- ton A. Each time button is pressed the level changes (For the selection of a new level see the chart).
Examples:
If the current level is 5, by pressing function button A once, level 6 is selected. If the current level is 10, by pressing button A once, level 1 is selected.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.
Filling with dishwasher salt
CAUTION!
Use only special salt suitable for dishwashers.
11