Zanussi ZDT 6454 user manual Audible signals, Select and start a washing programme

Page 6

Audible signals

Audible signals have been introduced to help indicate which operations the dishwasher is performing:

•setting the water softener,

•end of the programme,

•intervention of an alarm due to malfunction.

IMPORTANT!

Factory setting: audible signals activated.

Deactivation/activation of the audible sig- nals

1.Press On/Off button. The dishwasher must be in setting mode.

2.Simultaneously press and hold function buttons B and C until the lights of function buttons A, B and C start flashing.

3.Press function button C, the lights of func- tion buttons A and B turn off while the light of function button C goes on flashing. At the same time the end of programme in- dicator light illuminates indicating that the audible signals are active.

4.To deactivate teh audible signals press again function button C, the end of pro- gramme indicator light turns off, indicating that the audible signals have been deacti- vated.

5.To memorise the operation switch off the dishwasher by pressing the On/Off button.

To activate again the audible signals simply follow the above operations until the end of programme indicator light illuminates.

Select and start a washing programme

IMPORTANT!

Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the set made.

1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate

2.Check that the water tap is opened

3.Press the On/Off button. The dishwasher must be in setting mode.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dishwasher ZDT Contents Child safety Safety informationGeneral safety Correct useInstallation Control panelFunctions buttons Indicator lights Audible signals Select and start a washing programmeDeactivation/activation of the audible sig- nals Interrupt a washing programme in pro- gress Cancelling the delay startCancel a washing programme in progress End of the washing programmeDegree of soil Washing programmesProgramme Type of loadWhen using tablets that integrate rinse aid and detergent First useSet the water softener Dishwasher is factory set at level Setting the water softener manually see tableSetting the water softener electronically see table Water hardness Mmol/lFilling with dishwasher salt ExamplesOnly before filling with Adjusting the dosage of rinse aid Filling with rinse aidLoading cutlery and dishes Are of limited suitabilityAdjusting the height of the upper basket Maximum height of the dishes Upper basketLower basket Use of detergent Care and cleaning Cleaning the filtersUnloading the dishwasher Internal cleaning Cleaning the spray armsExternal cleaning Prolonged periods of non- operationMoving the machine Frost precautionsEnvironmental concerns Packaging materialFault code and malfunction Possible cause and solutionSomething not working Wash results are not satisfactory Technical data Consumption valuesHints for test institutes Installation Full load 12 standard place settingsWater connection Water inlet hose with safety valve Drain hose Electrical connectionFitting under a counter Guarantee conditionsEuropean Guarantee LevellingPage Page Page Page Page 156997520-00-21022007 Subject to change without notice
Top Page Image Contents