WARNING!
Only use, for connection to the water mains, new
CAUTION!
If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes be- fore connecting the inlet hose.
Water inlet hose with safety valve
Connect the inlet hose to a water tap with an external thread of 3/4”.
After connecting the
If the water inlet hose leaks, the safety valve cuts off the water supply.
24
WARNING!
The electrical cable for the safety valve is in the
Take care when installing the water inlet hose
. Place the water inlet hose in such a way that it is always lower than the bottom edge of the safety valve.
If the water inlet hose or the safety valve is damaged, remove the mains plug immediately.
CAUTION!
A water inlet hose with safety valve MUST only be replaced by your local Service Force Centre.