Zanussi ZDT 6454 user manual Filling with rinse aid, Adjusting the dosage of rinse aid

Page 13

Filling with rinse aid

Open the lid.

CAUTION!

Fill up with rinse aid. The maximum level for filling is indicated by "max"

IMPORTANT!

Clean up any rinse aid which overflows. Close the lid and press until it locks.

Never fill the rinse aid dispenser with any other sub- stances (e.g. dishwasher cleaning agent, liquid de- tergent). This would damage the appliance.

Top up the rinse aid when the light on the control panel illuminates.

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades.

Open the lid.	Set the dosage level.	Close the lid and press
	(The dose is factory set in	until it locks.
	position 4).

Image 13

Contents Dishwasher ZDT Contents General safety Safety informationChild safety Correct useControl panel InstallationFunctions buttons Indicator lights Select and start a washing programme Audible signalsDeactivation/activation of the audible sig- nals Cancel a washing programme in progress Cancelling the delay startInterrupt a washing programme in pro- gress End of the washing programmeProgramme Washing programmesDegree of soil Type of loadFirst use When using tablets that integrate rinse aid and detergentSet the water softener Setting the water softener electronically see table Setting the water softener manually see tableDishwasher is factory set at level Water hardness Mmol/lExamples Filling with dishwasher saltOnly before filling with Filling with rinse aid Adjusting the dosage of rinse aidAre of limited suitability Loading cutlery and dishesMaximum height of the dishes Upper basket Adjusting the height of the upper basketLower basket Use of detergent Cleaning the filters Care and cleaningUnloading the dishwasher External cleaning Cleaning the spray armsInternal cleaning Prolonged periods of non- operationEnvironmental concerns Frost precautionsMoving the machine Packaging materialPossible cause and solution Fault code and malfunctionSomething not working Wash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 12 standard place settings InstallationWater connection Water inlet hose with safety valve Electrical connection Drain hoseEuropean Guarantee Guarantee conditionsFitting under a counter LevellingPage Page Page Page Page 156997520-00-21022007 Subject to change without notice