Zanussi ZDT 6454 user manual Cleaning the spray arms, External cleaning, Internal cleaning

Page 18

Clean filters A, B and C				Turn the handle about 1/4	Remove filter A from the
thoroughly under running				turn anticlockwise and	base of the washing
water.				remove filters B and C.	compartment.

Put the flat filter A back in	Replace the filters and
the base of the washing	lock by turning the handle
compartment and ensure	clockwise to the stop.
that it fits perfectly under
the two guidesD.

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If neces- sary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).

18

Internal cleaning

Ensure that the seals around the door, the de- tergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run the wash programme for heavy soiled dishes using de- tergent but without dishes.

Prolonged periods of non- operation

If you are not using the machine for any pro- longed period of time you are advised to:

1.Unplug the appliance and then turn off the water.

Image 18

Contents Dishwasher ZDT Contents Child safety Safety informationGeneral safety Correct useInstallation Control panelFunctions buttons Indicator lights Audible signals Select and start a washing programmeDeactivation/activation of the audible sig- nals Interrupt a washing programme in pro- gress Cancelling the delay startCancel a washing programme in progress End of the washing programmeDegree of soil Washing programmesProgramme Type of loadWhen using tablets that integrate rinse aid and detergent First useSet the water softener Dishwasher is factory set at level Setting the water softener manually see tableSetting the water softener electronically see table Water hardness Mmol/lFilling with dishwasher salt ExamplesOnly before filling with Adjusting the dosage of rinse aid Filling with rinse aidLoading cutlery and dishes Are of limited suitabilityAdjusting the height of the upper basket Maximum height of the dishes Upper basketLower basket Use of detergent Care and cleaning Cleaning the filtersUnloading the dishwasher Internal cleaning Cleaning the spray armsExternal cleaning Prolonged periods of non- operationMoving the machine Frost precautionsEnvironmental concerns Packaging materialFault code and malfunction Possible cause and solutionSomething not working Wash results are not satisfactory Technical data Consumption valuesHints for test institutes Installation Full load 12 standard place settingsWater connection Water inlet hose with safety valve Drain hose Electrical connectionFitting under a counter Guarantee conditionsEuropean Guarantee LevellingPage Page Page Page Page 156997520-00-21022007 Subject to change without notice