Zanussi ZDT 6454 user manual Consumption values, Technical data, Hints for test institutes

Page 22

Consumption values

The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var-

iations of the power supply and the amount of dishes.

Consumption values

Programme		Programme duration	Energy consumption	Water (litres)
		(in minutes)	(in kWh)
Intensive 70°		80-90	1,6-1,8	22-24
Normal 65°		95-105	1,5-1,7	21-23
65°A30'		30	0,9	9
BIO 50° (Test pro-		170	1,05	16
gramme for Test Insti-
tutes)
Rinse and Hold		12	0,1	4

Technical data

Dimensions

Electrical connection Voltage - Overall power - Fuse

Water supply pressure

Capacity

Max. weight

Noise level

Width x Height x Depth (cm)

59,6 x 81,8-87,8 x 55,5

Information on the electrical connection is given on the rating plate on the inner edge of the dishwashers door.

Minimum - Maximum	0,05 - 0,8
(MPa)
place settings	12
kg	37
dB(A)	49

Hints for test institutes

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and us- ing the test programme (see "Consumption values").

Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and

22

Image 22

Contents Dishwasher ZDT Contents Child safety Safety informationGeneral safety Correct useControl panel InstallationFunctions buttons Indicator lights Select and start a washing programme Audible signalsDeactivation/activation of the audible sig- nals Interrupt a washing programme in pro- gress Cancelling the delay startCancel a washing programme in progress End of the washing programmeDegree of soil Washing programmesProgramme Type of loadFirst use When using tablets that integrate rinse aid and detergentSet the water softener Dishwasher is factory set at level Setting the water softener manually see tableSetting the water softener electronically see table Water hardness Mmol/lFilling with dishwasher salt ExamplesOnly before filling with Adjusting the dosage of rinse aid Filling with rinse aidLoading cutlery and dishes Are of limited suitabilityMaximum height of the dishes Upper basket Adjusting the height of the upper basketLower basket Use of detergent Cleaning the filters Care and cleaningUnloading the dishwasher Internal cleaning Cleaning the spray armsExternal cleaning Prolonged periods of non- operationMoving the machine Frost precautionsEnvironmental concerns Packaging materialPossible cause and solution Fault code and malfunctionSomething not working Wash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 12 standard place settings InstallationWater connection Water inlet hose with safety valve Drain hose Electrical connectionFitting under a counter Guarantee conditionsEuropean Guarantee LevellingPage Page Page Page Page 156997520-00-21022007 Subject to change without notice