Zanussi ZDT 6454 user manual Unloading the dishwasher, Care and cleaning, Cleaning the filters

Page 17

For programmes with	When using detergent	Close the lid.
prewash add an addition-	tablets: place detergent
al detergent dose in com-	tablets in compartment
partmentB.	A.

Unloading the dishwasher

•Hot dishes are sensitive to knocks.

The dishes should therefore be allowed to cool down before removing from the appli- ance.

•Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

•Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

CAUTION!

When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off.

Care and cleaning

Cleaning the filters

IMPORTANT!

NEVER use the dishwasher without filters. In- correct repositioning and fitting of the filters will produce poor washing results.

Image 17

Contents Dishwasher ZDT Contents General safety Safety informationChild safety Correct useFunctions buttons InstallationControl panel Indicator lights Deactivation/activation of the audible sig- nals Audible signalsSelect and start a washing programme Cancel a washing programme in progress Cancelling the delay startInterrupt a washing programme in pro- gress End of the washing programmeProgramme Washing programmesDegree of soil Type of loadSet the water softener When using tablets that integrate rinse aid and detergentFirst use Setting the water softener electronically see table Setting the water softener manually see tableDishwasher is factory set at level Water hardness Mmol/lExamples Filling with dishwasher saltOnly before filling with Filling with rinse aid Adjusting the dosage of rinse aidAre of limited suitability Loading cutlery and dishesLower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basket Use of detergent Unloading the dishwasher Care and cleaningCleaning the filters External cleaning Cleaning the spray armsInternal cleaning Prolonged periods of non- operationEnvironmental concerns Frost precautionsMoving the machine Packaging materialSomething not working Fault code and malfunctionPossible cause and solution Wash results are not satisfactory Hints for test institutes Technical dataConsumption values Water connection InstallationFull load 12 standard place settings Water inlet hose with safety valve Electrical connection Drain hoseEuropean Guarantee Guarantee conditionsFitting under a counter LevellingPage Page Page Page Page 156997520-00-21022007 Subject to change without notice