Frigidaire ES40, 316257124 Setting Oven Lockout Feature, To activate the Oven Lockout feature

Page 18

Setting Oven Controls

Setting Oven Lockout Feature

The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the warmer drawer and ESEC Control from being turned on. It does not disable the clock, Kitchen Timer, Warmer Zone or the interior oven lights.

INSTRUCTIONS

To activate the Oven Lockout feature:

1. Press and hold for three seconds (Fig. 1).

2. After 3 seconds the lock icon light (

) will appear, a beep will

sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the lock icon light.

PRESSDISPLAY

for 3 seconds

Figure 1

To reactivate normal oven operation:

1.

Press and hold

for three seconds. A beep will sound. The

for 3 seconds

 

"DOOR LOCKED" will continue to flash until the oven door has

 

 

 

completely unlocked and the lock icon light (

) will clear

 

 

 

 

 

 

(See Fig. 2).

 

 

 

 

2.

The range is again fully operational.

 

 

 

 

 

Figure 2

Setting Temperature Display — Fahrenheit or Celsius

The BROIL and CLEAN pads control the Fahrenheit or Celsius

temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

INSTRUCTIONSPRESS

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit:

1. To tell if the display is set for Fahrenheit or Celsius press and

hold the

pad. "BROIL", "550°" will appear in the display

for 7seconds

(See Fig. 3) and continue to HOLD for 7 seconds. A beep will then sound. If "F" appears, the display is set to show temperatures in Fahrenheit (Fig. 4). If "C" appears, the display is set to show temperatures in Celsius (Fig. 5).

2. Press to switch between Fahrenheit or Celsius display modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).

3. Press

to accept the change or press

 

to reject the

or

 

change.

 

 

 

 

 

 

18

 

DISPLAY

Figure 3

Figure 4

Figure 5

Image 18
Contents Page Welcome & Congratulations Register Your ProductImportant Safety Instructions Read and Save These Instructions Features At a Glance Features At a Glance About the Radiant Surface Elements Setting Surface ControlsAbout the Ceramic Glass Cooktop Locations of the Radiant Surface Elements and ControlsAvailable Esec Display Settings Recommended Surface Cooking SettingsElectronic Surface Element Control Esec Esec Lockout Feature Esec Hot Element Indicator Message HEEsec Error Indicator Message Er Single Radiant Surface ElementsBridge Surface Radiant Element Dual Surface Radiant ElementTo Operate the Dual Surface Element Using Proper Cookware Surface CookingTo Operate the Bridge Surface Element Temperature Selection Operating the Warming ZoneTo Set the Warming Zone Control Air Circulation in the Oven Before Setting Oven ControlsArranging the Oven Racks Oven Vent LocationSetting Warming Drawer Controls Minimum and Maximum Control Pad Control Pad FeaturesSettings Function follow later in this Use & Care ManualTo set the clock example below for Setting Oven ControlsSetting the Clock Changing between 12 or 24 hour time of day displayTo set the Kitchen Timer example for 5 minutes Setting Continuous Bake or 12 Hour Energy SavingSetting Kitchen Timer To cancel the Kitchen Timer before the set time has run outSetting Temperature Display Fahrenheit or Celsius Setting Oven Lockout FeatureTo activate the Oven Lockout feature To reactivate normal oven operationSetting Silent Control Operation Setting Preheat To set the Preheat temperature for 350FSetting Bake To set the Bake Temperature to 350FSetting Timed Bake When the timed bake time runs outConv Roast or Conv Bake pads Setting Delayed Time Bake When the set bake time runs outTo set the oven to broil at the default setting 550F Broiling TimesSetting Convection Roast Convection Roasting InstructionsGeneral Convection Bake Instructions Setting Convection BakeTo set the oven for Convection Bake and temperature to 350F Benefits of Convection BakeSelf-Cleaning Preparing for the Self-Clean CycleTo Start Self-Clean Cycle When the Self-Clean Cycle has completedStopping or Interrupting a Self-Cleaning Cycle To Start Delayed Self-Clean Cycle To adjust the oven temperature higher Adjusting Oven TemperatureTo Start Delayed Self-Clean Cycle cont’d To adjust the oven temperature lowerCare & Cleaning Surfaces How to CleanStainless Steel, Chrome Plastic or foods with a high sugar content Cooktop Cleaning and MaintenanceCleaning Recommendations for the Ceramic Glass Cooktop For light to moderate soilRemoving and Replacing the Oven Door all models To Remove Oven DoorTo Replace Oven Door Removing and Replacing the Warming Drawer some models Operating and Replacing the Oven LightSolutions to Common Problems Before You CallSolutions to Common Problems cont’d Cooking Tables Decrease Normal cook time byPage Page Range Warranty