Setting Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
The KITCHEN TIMER 
and CLEAN 
pads control the Continuous Bake or 12 Hour Energy Saving features. The
oven control has a factory preset
INSTRUCTIONS | PRESS | DISPLAY |
To set the control for Continuous Bake or 12 Hour Energy Saving features:
1.Press and hold 
for 7 seconds (Fig.1). ":12" or ":-
2.Press 
to switch between the 12 Hour Energy Saving and continuous bake features. Note: ":12" in the display indicates the control is set for the 12 Hour Energy Saving mode and ":-
3.Press 
to accept the change (Fig. 4; display will return to
time of day) or press 
to reject the change.
for 7 seconds
Figure 1
Figure 2
or
Figure 3
Figure 4
Setting Kitchen Timer
The KITCHEN TIMER 
pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the
kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to the “Minimum and Maximum Control Pad Settings” on page 15 for the time amount settings.
INSTRUCTIONS | PRESS | DISPLAY |
To set the Kitchen Timer (example for 5 minutes):
1. Press 
. "0:00" will appear and "TIMER" will flash in the display (Fig. 5).
Figure 5
2. Press the number pads to set the desired time in the display
(example 
). Press 
. The time will begin to count down
(Fig. 6) and "TIMER" will appear in the display. Note: If 
is not pressed the timer will return to the time of day.
3.When the set time has run out, "End" will show in the display
(Fig. 7), and 3 beeps every 60 seconds will sound until 
is pressed.
Figure 6
Figure 7
To cancel the Kitchen Timer before the set time has run out:
Press 
. The display will return to the time of day.
17