Frigidaire ES40, 316257124 Adjusting Oven Temperature, To Start Delayed Self-Clean Cycle cont’d

Self-Cleaning

To Start Delayed Self-Clean Cycle (cont’d)
	INSTRUCTIONS	PRESS	DISPLAY
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press
	.

2. Once the oven has cooled down for approximately 1 HOUR and

the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Fig. 2-1).

Figure 2-1

Adjusting Oven Temperature

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

INSTRUCTIONSPRESS

To adjust the oven temperature higher:

1. Press for 6 seconds (Fig. 1).

2. To increase the temperature use the number pads to enter the

desired change. (Example 30°F) (Fig. 2). The

temperature may be increased upwards as much as 35°F.

3. Press to accept the temperature change and the display

will return to the time of day (Fig. 3). Press to reject the

change if necessary.

To adjust the oven temperature lower:

1. Press for 6 seconds (Fig. 4).

2. To decrease the temperature use the number pads to enter the

desired change. (Example -30°F) and then press

(Fig. 5). The temperature may be decreased as much as

35°F.

3. Press to accept the temperature change and the display

will return to the time of day (Fig. 6). Press to reject the

change if necessary.

30

Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature.

DISPLAY

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6