Frigidaire 316257124, ES40 manual Setting Silent Control Operation

Page 19

Setting Oven Controls

Setting Silent Control Operation

The STOP TIME and CLEAN pads control the Silent Control operation feature. The Silent Control operation

feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS

PRESS

DISPLAY

To change control from normal sound operation to silent control operation:

1.To tell if your range is set for normal or silent operation press

and hold for 7 seconds. "DELAY" will appear and flash in the display (Fig. 1). If ":SP" appears (Fig. 2), the control will operate with normal sounds and beeps. If ":- -" appears (Fig.3), the control is in the silent operation mode.

2.Press to switch between normal sound operation and silent operation mode. The display will show either ":SP" (Fig. 2) or ":- -" (Fig. 3).

3.Press to accept the change or press to reject the change.

for 7seconds

Figure 1

Figure 2

or

Figure 3

19

Image 19

Contents Page Register Your Product Welcome & CongratulationsImportant Safety Instructions Read and Save These Instructions Features At a Glance Features At a Glance Locations of the Radiant Surface Elements and Controls Setting Surface ControlsAbout the Ceramic Glass Cooktop About the Radiant Surface ElementsRecommended Surface Cooking Settings Available Esec Display SettingsElectronic Surface Element Control Esec Single Radiant Surface Elements Esec Hot Element Indicator Message HEEsec Error Indicator Message Er Esec Lockout FeatureDual Surface Radiant Element Bridge Surface Radiant ElementTo Operate the Dual Surface Element Surface Cooking Using Proper CookwareTo Operate the Bridge Surface Element Operating the Warming Zone Temperature SelectionTo Set the Warming Zone Control Oven Vent Location Before Setting Oven ControlsArranging the Oven Racks Air Circulation in the OvenSetting Warming Drawer Controls Function follow later in this Use & Care Manual Control Pad FeaturesSettings Minimum and Maximum Control PadChanging between 12 or 24 hour time of day display Setting Oven ControlsSetting the Clock To set the clock example below forTo cancel the Kitchen Timer before the set time has run out Setting Continuous Bake or 12 Hour Energy SavingSetting Kitchen Timer To set the Kitchen Timer example for 5 minutesTo reactivate normal oven operation Setting Oven Lockout FeatureTo activate the Oven Lockout feature Setting Temperature Display Fahrenheit or CelsiusSetting Silent Control Operation To set the Preheat temperature for 350F Setting PreheatTo set the Bake Temperature to 350F Setting BakeWhen the timed bake time runs out Setting Timed BakeConv Roast or Conv Bake pads When the set bake time runs out Setting Delayed Time BakeBroiling Times To set the oven to broil at the default setting 550FConvection Roasting Instructions Setting Convection RoastBenefits of Convection Bake Setting Convection BakeTo set the oven for Convection Bake and temperature to 350F General Convection Bake InstructionsPreparing for the Self-Clean Cycle Self-CleaningWhen the Self-Clean Cycle has completed To Start Self-Clean CycleStopping or Interrupting a Self-Cleaning Cycle To Start Delayed Self-Clean Cycle To adjust the oven temperature lower Adjusting Oven TemperatureTo Start Delayed Self-Clean Cycle cont’d To adjust the oven temperature higherSurfaces How to Clean Care & CleaningStainless Steel, Chrome For light to moderate soil Cooktop Cleaning and MaintenanceCleaning Recommendations for the Ceramic Glass Cooktop Plastic or foods with a high sugar contentTo Remove Oven Door Removing and Replacing the Oven Door all modelsTo Replace Oven Door Operating and Replacing the Oven Light Removing and Replacing the Warming Drawer some modelsBefore You Call Solutions to Common ProblemsSolutions to Common Problems cont’d Decrease Normal cook time by Cooking TablesPage Page Range Warranty