Sherwood R-671 manual When CD, Video 1~3 is selected as, An input source

When CD, VIDEO 1~3 is selected as		7	To compensate for edgy or shrill movie
an input source			sound tracks.
4	Select the digital or analog input
	connected as desired.
		• Then “C-EQ OFF” is scrolled.
		• Press it again to work, the “C-EQ ON” is scrolled.
		• When 96 kHz PCM(2 CH stereo) signals are input
• Each time this button is pressed, the		or the SPEAKER button is set to off, the cinema
		EQ function does not work.
corresponding input is selected as follows ;
		8	To mute the sound.
• When TUNER, TAPE, AUX or EXTERNAL IN is
selected as an input source, the digital input
cannot be selected.
■Notes :
• When the selected optical or coaxial digital
input is not connected, the “DIGITAL” indicator
flickers, meaning no sound. (Refer to
“ENJOYING SURROUND SOUND” on page
29.)		• “MUTE” will flicker.
• The sound from the component connected to
		• To resume the previous sound level, press it again.
the selected digital input can be heard
regardless of the selected input source.
5	Operate the selected component for	9	To listen with the headphones.
	playback.

• When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 29.

6	Adjust the (overall) volume.
	• Ensure that the SPEAKER button is set to off.
	• Depending on the signal format which is being
	input, you can listen in different Dolby
	Headphone modes, stereo mode, etc. with
	pressing the DSP MODE ◀(<) /▶(>)
	buttons.(For details, refer to “Listening in a Dolby
	Headphone mode” on page 30).

25