Sherwood R-671 manual

Page 44

2

Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.

3

Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.

 

■ In case of speaker size, you can select one of these following types.

YES/NONE: Select the desired depending on whether a subwoofer is connected or not.

LARGE: Select this when connecting speakers that can fully reproduce sounds below crossover frequency.

SMALL: Select this when connecting speakers that can not fully reproduce sounds below crossover frequency. When this is selected, sounds below crossover frequency are sent to the subwoofer or speakers which are set to LARGE(when not using a subwoofer)

NONE: Select this when no speakers are connected. When this is selected, sounds are sent to the speakers which are not set to NONE.

• Crossover frequency is the frequency(Hz) below which the bass sound of each main speakers is to output from the subwoofer or from speakers which are set to LARGE(when not using a subwoofer).

•Refer to the operating instructions of the speakers to be connected. If the frequency range of your speaker is 100Hz~20kHz, the crossover frequency have to be set to 100Hz(or slightly higher)

■In case of speaker distance, you can adjust the distance between the listening position and each speaker within the range of 1~30 feet in 1 foot intervals.

■In case of crossover frequency, you can adjust the crossover frequency within the range of 40~130Hz in 10Hz intervals.

■Notes :

•When speakers are set to “SMALL”, you should set the CROSSOVER FREQUENCY correctly according to their frequency characteristics.

•When “SUBWOOFER” is set to “NONE”, “FRONT” is automatically set to “LARGE”.

•When the “FRONT” is set to “SMALL”, “CENTER”, ”SURR” , ”SURR B” cannot be set to “LARGE”.

•When the “SURR” is set to “SMALL”, “SURR B” cannot be set to “LARGE”.

•You cannot adjust the distances of subwoofer and the speakers set to “NONE”.

Repeat the above steps ② and ③

4 until the items are all set to the desired.

Confirm your selection.

5

• The adjusted settings are memorized.

43

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Page Introduction Read this Before Operating Your UnitSafety Instruction Contents System Connections Connecting Video Components Connecting Audio Components Connecting System Control Speaker placement AC Input Cord Front Panel Controls Video 3 Input Jacks Universal Remote Controls Digi link system remote controlsFunction Table of the Numbered Buttons Remote Control Operation Range Loading BatteriesUsing Functions of Remote Control Entering a setup codeUsing a punch-through function Programming a macro function Operating a macro functionSpeaker Setup Setting the Speaker Setup Manually Before setting the speaker setupFront R Setting the Speaker Setup Automatically Auto Speaker Setup When specifying the number of speakers installed When specifying the subwoofer or the crossover frequencyWhile displaying SET MEMO, check Listening to a Program Source Before operationWhen CD, Video 1~3 is selected as An input sourceAdjusting the tonebass and treble Enter the tone modeSurround Sound Surround modesDolby Pro Logic IIx surround Dolby Pro Logic II surroundDolby Virtual Speaker Dolby HeadphoneSelectable surround mode Enjoying Surround Sound2CH downmix mode Listening in a Dolby Headphone modeTo cancel the surround mode for stereo operation Adjusting each channel level with test tone Adjusting the current channel level Channel is selected as followsRecalling the memorized channel levels Memorizing the adjusted channel levels32, press the MEMORY/ Enter button Listening to Radio Broadcasts Auto tuningManual tuning Presetting radio stations Tuning to preset stations Memory Backup FunctionDubbing the audio and video signals RecordingRecording with Tape Dubbing from video components ontoDigital Audio Recording with MD Recorder Operating the sleep timer Adjusting the brightness of the fluorescent displaysOther Functions Compressing the dynamic range Dolby Digital sources onlyUsing the OSD Current Status DisplayWhen selecting the Speaker Setup Preparations Setting the Speaker SetupWhen selecting the Auto Speaker Setup When selecting the Manual Speaker Setup Page When selecting the Digital Input Selecting the FunctionWhen selecting the Video Select When selecting the Tone ControlSelecting the Surround Mode Setting the CH Level Setup Recalling the memorized channel levels Troubleshooting Guide Specifications Setup Code Table VCR KLH DVD AUX-TAPE/MD AUX-HOME Automation

R-671 specifications

The Sherwood R-671 is a sophisticated and versatile receiver that has gained a strong reputation among audio enthusiasts and home theater aficionados. Renowned for its exceptional sound quality and robust performance, the R-671 is a testament to Sherwood's commitment to delivering high-fidelity audio experiences.

One of the standout features of the Sherwood R-671 is its powerful amplifier section. With a total power output of 100 watts per channel, it is capable of driving a variety of speaker configurations, from compact bookshelf speakers to larger floor-standing models. This ample power ensures that users can enjoy dynamic sound reproduction across a wide range of frequencies.

In terms of connectivity, the R-671 is equipped with multiple input options, including HDMI, digital optical, and coaxial inputs. This diverse array of connections makes it easy to integrate a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it includes several analog inputs for connecting legacy audio equipment, ensuring compatibility with older components.

One of the most noteworthy technologies featured in the Sherwood R-671 is its advanced surround sound processing. The receiver supports multiple surround formats, including Dolby Digital and DTS, which allows users to experience immersive multi-channel audio from their favorite movies and music. This capability is further enhanced by Sherwood's proprietary sound enhancement technologies, which optimize audio playback for a more engaging listening experience.

The user interface of the R-671 is designed with ease of use in mind. The front panel features clearly labeled buttons and a bright display, making it straightforward to navigate through settings and inputs. Additionally, the receiver comes with a comprehensive remote control, allowing users to manage their audio and video sources from the comfort of their seating area.

The Sherwood R-671 also boasts an eco-friendly design, incorporating energy-saving features that minimize power consumption when the unit is not in active use. This not only reduces the overall environmental footprint but also leads to lower energy bills for users.

In conclusion, the Sherwood R-671 is a feature-rich receiver that exemplifies quality and performance. With its powerful amplification, versatile connectivity options, advanced surround sound processing, user-friendly interface, and eco-conscious design, it represents an excellent choice for anyone looking to elevate their home audio experience. Whether for casual listening or serious home theater applications, the Sherwood R-671 is equipped to deliver an exceptional performance.
Top Page Image Contents