Memorizing the adjusted channel levels
•You can memorize the adjusted channel levels into preset memory(“REF. 1”, “REF. 2”) and recall the memorized whenever you want.
1 | After performing the steps ①~③ in “Adjusting the current channel level” procedure on page |
47, press the ENTER button. |
• The “1” of “REF. 1” indication flickers.
2 | Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired preset memory, |
then press the ENTER button. |
• Each time the CURSOR LEFT(◀) or RIGHT(▶) button is pressed, “REF. 1” or “REF. 2” is selected.
• The adjusted channel levels has now been memorized into the selected memory.
Recalling the memorized channel levels
Press the CURSOR
1 UP(▲)/DOWN(▼) buttons to select the preset memory mode.
Press the CURSOR LEFT(◀)/
2 RIGHT(▶) buttons to select the desired one of REF. 1 and REF. 2.
•“USER” may be displayed instead of “REF. 1” or “REF. 2”.
•Then the channel levels memorized into the selected preset memory are recalled.
48