Sherwood R-671 manual Selecting the Surround Mode

Page 47

Set the selected mode as desired.

3

■When the TONE CONTROL mode is selected, press the ENTER button to select the desired mode.

•Each time this button is pressed, the mode changes as follows:

ON: When adjusting the tone for your taste. (“DIRECT” indicator goes off.)

OFF: When listening to a program source without the tone effect.(“DIRECT”indicator lights up.)

■When the BASS or TREBLE mode is selected, press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the tone as desired.

• The tone level can be adjusted within the range of -10 ~+10 dB

•In general, we recommend the bass and treble to be adjusted to 0 dB(flat level)

•Extreme settings at high volume may damage your speakers.

•To complete tone adjustment, repeat the above steps ② and ③.

SELECTING THE SURROUND MODE

Example) When digital signals from Dolby Digital EX 6.1 channel source are input.

■ Notes :

• Depending on the input signal format, surround back speaker setting and the selected decoding mode, the selectable surround modes may differ.

•When the EXTERNAL IN is selected as input source, the SURROUND MODE cannot be selected.

•Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired surround mode.

• In case of playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source in a Dolby Headphone mode, press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired listening mode.

46

Image 47

Contents Page Read this Before Operating Your Unit IntroductionSafety Instruction Contents System Connections Connecting Video Components Connecting Audio Components Connecting System Control Speaker placement AC Input Cord Front Panel Controls Video 3 Input Jacks Digi link system remote controls Universal Remote ControlsFunction Table of the Numbered Buttons Loading Batteries Remote Control Operation RangeEntering a setup code Using Functions of Remote ControlUsing a punch-through function Operating a macro function Programming a macro functionSpeaker Setup Before setting the speaker setup Setting the Speaker Setup ManuallyFront R Setting the Speaker Setup Automatically Auto Speaker Setup When specifying the subwoofer or the crossover frequency When specifying the number of speakers installedWhile displaying SET MEMO, check Before operation Listening to a Program SourceAn input source When CD, Video 1~3 is selected asEnter the tone mode Adjusting the tonebass and trebleSurround modes Surround SoundDolby Headphone Dolby Pro Logic IIx surroundDolby Pro Logic II surround Dolby Virtual SpeakerEnjoying Surround Sound Selectable surround mode2CH downmix mode Listening in a Dolby Headphone modeTo cancel the surround mode for stereo operation Adjusting each channel level with test tone Channel is selected as follows Adjusting the current channel levelRecalling the memorized channel levels Memorizing the adjusted channel levels32, press the MEMORY/ Enter button Listening to Radio Broadcasts Auto tuningManual tuning Presetting radio stations Memory Backup Function Tuning to preset stationsDubbing from video components onto Dubbing the audio and video signalsRecording Recording with TapeDigital Audio Recording with MD Recorder Compressing the dynamic range Dolby Digital sources only Operating the sleep timerAdjusting the brightness of the fluorescent displays Other FunctionsCurrent Status Display Using the OSDWhen selecting the Speaker Setup Preparations Setting the Speaker SetupWhen selecting the Auto Speaker Setup When selecting the Manual Speaker Setup Page Selecting the Function When selecting the Digital InputWhen selecting the Tone Control When selecting the Video SelectSelecting the Surround Mode Setting the CH Level Setup Recalling the memorized channel levels Troubleshooting Guide Specifications Setup Code Table VCR KLH DVD AUX-TAPE/MD AUX-HOME Automation