Sherwood R-671 manual Listening to Radio Broadcasts, Auto tuning

LISTENING TO RADIO BROADCASTS

Auto tuning	Select the desired band.
	2
1 Select the tuner.

• Each time this button is pressed, the band is changed to FM or AM.

• When pressing the BAND button without selecting the TUNER, the tuner will be selected automatically.

Select the auto tuning mode.	4	Press the TUNING/PRESET ▲/▼
3		buttons briefly or press the TUNE +/-
		buttons for more than 0.5 second.

• Each time this button is pressed, the mode
	• The tuner will now search until a station of
changes as follows;
	sufficient strength has been found. The display
	shows the tuned frequency and “TUNED”.
	• If the station found is not the desired one, simply
	repeat this operation.
	• Weak stations are skipped during auto tuning.
	• When pressing the TUNE +/- buttons for more
	than 0.5 second on the remote control, you need
	not select the auto tuning mode on step ③.

	Manual tuning	Presetting radio stations
• Manual tuning is useful when you already know the
		• You can store up to 30 preferred stations in the
frequency of the desired station.
		memory.
• Select the manual tuning mode performing the
steps ① to ③ in “Auto tuning” procedure and press		1	Tune in the desired station with auto or
the TUNING/PRESET ▲/▼or TUNE +/- buttons			manual tuning.
repeatedly until the right frequency has been
reached.
• When pressing the TUNE +/- buttons repeatedly		2	Press the MEMORY/ENTER button.
on the remote control, you need not select the
manual tuning mode on step ③ in “Auto tuning”
procedure.

• “MEM” is flickering for several seconds.

34