Frigidaire FPIF3093LF Setting Oven Controls, Setting the clock, Changing oven temperature display

SETTING OVEN CONTROLS

Setting the clock

When the range is first powered up, “12:00” will flash in the display (See Fig. 1).

To set the clock to 1:30:
	Step	Press
1.	Press set clock.
2.	Enter 1:30.
3.	Press start.

NOTE

It is recommended to always set the clock for the correct time of day before using the appliance. The clock cannot be changed whenever any timed or delayed time feature is active.

Fig. 1

Changing between continuous bake setting or 6-Hour Energy Saving feature

The oven control has a factory preset built-in 6 Hour Energy Saving feature that will turn off the oven if the oven is left on for more than 6 hours. The control can be programmed to override this feature to continuously bake.

To turn off 6-Hour Energy saving mode:

Step Press

1.Press and hold timer on•off for 6 seconds.

2.Press self-clean

to toggle between “6 Hr OFF” (Fig. 2) or “StAY On” (Fig. 3). Select “StAY On” to turn off

6-Hour Energy Saving mode.

3.Press start to accept.

Fig. 2 Fig. 3

Setting 12 or 24 hour display mode

The clock display mode allows you to choose between 12 or 24 hr mode. The factory pre-set clock display mode is 12 hr. See the example below to change the default mode to 24 hr display.

To set 12 or 24 hour mode:
Step	Press

1.Press and hold set clock for 6 seconds.

2.Press self-clean

to toggle between “12 Hr dAY” or “24 Hr dAY” display modes (See Figs. 4 & 5).

3.Press start to accept.

Fig. 4 Fig. 5

Changing oven temperature display

The oven control is preset to display °F (Fahrenheit) when shipped from the factory.

To change the temperature to display °C (Celsius) (oven should not have bake or self-clean active when setting this feature):

Step Press

1.Press and hold broil for 6 seconds.

2.Press self-cleanto toggle

between “FAhrn ht” or “CELSIUS” temperature display modes (Figs. 6 & 7).

If Celsius display is needed, select “CELSIUS”.

3.Press start to accept.

Fig. 6 Fig. 7

20