Frigidaire FPIF3093LF To assemble the Effortless Oven Rack system

Page 9

Effortless™ Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.

Locate all required parts. You will need the supplied

 

oven rack (Effortless™ Oven Rack is a flat rack with a

 

special dark coating on the left and right rack

 

sides) and the 2 supplied chrome connector arms.

2.

Open the oven door. Be sure the oven is completely

 

cool before proceeding.

3.

Place the oven rack in positions 2, 3 or 4 only (see

 

previous page to verify positions).Be sure the rack

 

connector brackets are at the rear of the range and

 

pointing towards oven bottom (See Fig. 2).

4.

Assemble one connector arm at a time. With the oven

BEFORE SETTING OVEN CONTROLS

IMPORTANT

Only the Effortless™ Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

If the rack system is not assembled with the connector arms the Effortless™ Oven rack may be used in oven rack positions 2 thru 6. Do not attempt to use the Effortless™ Oven rack in rack position 1.

door

rack connector

connector

bracket

bracket

 

 

door open and the oven rack in place, install one end of

 

the connector arm to the hole in the door connector

 

bracket (Fig. 1) and the other end in the hole in the

 

rack connector bracket (Fig. 2 and as in Fig. 3). The

 

oven rack may need to be adjusted in or out in the rack

 

position to match the length of the connector arm.

5.

While holding the connector arm in place, twist the

 

connector arm so the ends of the connector arm point

 

upwards (See Figs. 4 & 5). The connector arm should

 

now be locked into position.

6.

Repeat steps 4 and 5 for the other connector arm.

7.

Once both connector arms are properly in place, be

Fig. 1

connector

arm

Fig. 3 - assembly of the Effortless™ Oven Rack

Fig. 2

oven rack

sure to test the oven rack operation by gently closing

the oven door. The oven rack should move in and out of

the oven freely when the door is opened or closed.

open oven

connector

door

arm

CAUTION

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless™ Oven Rack system will be damaged and will cause oven racks to loose their shiny finish and or turn blue. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

Make sure the oven and oven racks are COMPLETLY cool and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack system. Never pick up hot oven rack parts.

connector arm

Fig. 4

connector

arm

Fig. 5

left and right

door connector

brackets

with connector arm ends shown in locked position (pointing upwards)

Fig. 6 - Effortless™ Oven Rack after assembly

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Use&Care Product Record and Registration ContentsDefinitions Important Safety InstructionsImportant Safety Instructions Important Instructions for Using Your Oven Important Instructions for Using Your Cooktop Your electric range with induction cooktop features include Features AT a GlanceOven vent location Before Setting Oven ControlsRemoving, replacing & arranging racks Types of oven racksEffortless Oven Rack system To assemble the Effortless Oven Rack systemSpecial dark coating on the left and right rack Air circulation in the oven Before Setting Surface ControlsBaking layer cakes with 1 or 2 oven racks Benefits of induction surface cookingMoving cookware on smoothtop Cooktop operational noisesHot cookware and residual heat Be sure to read all cautionsPb Power Boost power level Available power level settingsCooktop display windows HE Hot surface window messageCookware Recommendations When using the cooking zonesInduction cookware Induction cookware typesPan sensing Induction Cooking ZonesCorrect Incorrect4 min Pan sensing-induction cooking zones cont’dMinimum pan size Maximum recommended pan sizePower sharing tips Power sharingSetting Surface Controls Operating induction cooking zonesTo operate induction cooking zones Step Press Operating induction cooking zones cont’d Pan preheat recommendationsHome Canning Minimum & maximum control settings Feature Min. temp. /time Max. temp. /timeOven Control Functions Setting the clock Setting Oven ControlsSetting 12 or 24 hour display mode Changing oven temperature displaySetting lockout Setting a silent control panelSetting the minute timer Add a minute featureSetting bake Setting powerplus preheatSetting bake time When the set bake time runs outSetting Oven Controls Convect roast all models Benefits of the convect featureSuggestions for convect baking Press convectSetting convect convert Convect broil some modelsSuggestions for convect broil Broil Suggested broil settings table electric ovenTo set broil Step Press Leave the oven door openSetting chicken nuggets feature Setting pizza featureSetting chicken nuggets feature cont’d Setting keep warmAdjusting the oven temperature Restoring factory default settingsOperating the oven light My Favorite To Set the Sabbath Feature for use on If a timed bake or delayed timed bake is neededBake time and delay start pads To Set the Sabbath Feature cont’d Keep Warm Drawer Keep warm drawer indicator lightOperating the keep warm drawer Operating keep warm drawerKeep warm drawer recommended settings Keep warm drawer recommended food settings FoodItem SettingArranging keep warm drawer rack positions SELF-CLEANING Self-cleaningAdhere to the following self-clean precautions When the self-clean cycle has completed Press delay startCleaning recommendation table Care & CleaningCooktop cleaning Cooktop maintenanceDo not For light to moderate soilCooktop cleaning cont’d Replacing the oven interior lightReplacing the oven interior light bulb Removing and replacing the lift-off oven door To remove oven doorTo replace oven door Problem Solution Solutions to common problems Before YOU Call Cleaning section Page Exclusions This warranty does not cover the following Major Appliance Warranty

FPIF3093LF specifications

The Frigidaire FPIF3093LF is a cutting-edge induction range that combines modern technology with user-friendly features, making it a standout choice for any kitchen. This electric range not only enhances the cooking experience but also promotes energy efficiency, ensuring that every meal is prepared with ease and precision.

At the heart of the FPIF3093LF is its induction cooking technology. Unlike traditional gas or electric stovetops, induction cooktops use magnetic fields to directly heat pots and pans, leading to faster cooking times and precise temperature control. This feature not only saves time but also reduces energy consumption, as heat is generated only where it is needed, resulting in less wasted energy.

The range is equipped with a spacious oven that boasts a generous capacity, allowing users to bake multiple dishes simultaneously or cook large meals without hassle. The true convection technology further enhances baking performance by circulating hot air throughout the oven, ensuring even cooking results no matter the dish. This feature is particularly beneficial for bakers, providing consistent temperatures for perfectly baked goods.

For added convenience, the Frigidaire FPIF3093LF comes with a variety of cooking presets and functions. With options such as self-cleaning, broiling, and delay start, users can easily customize their cooking experience to fit their schedules and preferences. The smooth-top induction surface is also easy to clean, as spills and splatters do not bake onto the cooktop, making post-meal cleanup a breeze.

Safety is another paramount consideration in the design of this range. With features like automatic shut-off and a hot surface indicator, users can cook with confidence, knowing that the appliance is designed with their safety in mind.

Aesthetically, the Frigidaire FPIF3093LF is sleek and modern, featuring a stainless steel finish that fits beautifully in any contemporary kitchen. The intuitive control panel is user-friendly, making it easy for cooks of all skill levels to navigate through its features.

In summary, the Frigidaire FPIF3093LF is an exceptional induction range that brings together advanced cooking technology, safety features, and stylish design. Whether preparing a quick weeknight dinner or a grand feast, this appliance meets the demands of modern cooking with efficiency and finesse.
Top Page Image Contents