~
—. Questions?
—–— Use This Problem Solver
PROBLEM |
|
| POSSIBLE CAUSE AND REMEDY |
|
|
|
|
OVEN WILL NOT |
|
| ● Plug on range is not completely inserted in the electrical outlet. |
WORK |
|
| c The circuit breaker in your house has been tripped, or a fuse has been blown. |
|
|
| |
|
|
| ● Oven controls not properly set. |
|
|
| ● Door left in locked position after cleaning. |
|
|
|
|
OVEN LIGHT |
|
| . Light bulb is loose. |
DOES NOT WORK |
|
| ● Bulb is defective. Replace. |
|
|
| |
|
|
| . Switch operating oven light is broken. Call for service. |
|
|
|
|
FOOD DOES NOT |
|
| ● OVEN SET knob not set at BROIL. |
BROIL PROPERLY |
|
| “ OVEN TEMP knob not set at BROIL. |
|
|
| |
|
|
| . Door not left ajar as recommended. |
|
|
| . Improper shelf position being used. Check Broiling Guide. |
|
|
| ● Necessary preheating was not done. |
|
|
| . Food is being cooked on hot pan. |
|
|
| ● Cookware is not suited for broiling. |
|
|
| ● Aluminum foil used on the broil pan rack has not been fitted properly and slit as |
|
|
| recommended. |
|
|
|
|
FOOD DOES NOT |
|
| ● OVEN SET knob not set on BAKE. |
ROAST OR BAKE |
|
| ● OVEN TEMP knob not set correctly. |
PROPERLY |
|
| |
|
| . Shelf position is incorrect. Check Roasting or Baking Guides. | |
|
|
| |
|
|
| . Oven shelf is not level. |
|
|
| ● Incorrect cookware or cookware of improper size is being used. |
|
|
| . A foil tent was not used when needed to slow down browning during roasting. |
|
|
|
|
CALROD “ SURFACE |
|
| “ Surface units are not plugged in solidly. |
~]NITS NO’T |
|
| ● Trim rings/drip pans are not set securely in the range top. |
FUNCTIONING |
|
| |
|
| ● Surface unit controls are not properly set. | |
PROPERLY |
|
| |
|
|
| |
|
|
|
|
OVEN WILL NOT |
|
| “ Automatic timer dials not set or not set properly. Clock must be set to time of day and |
|
|
| the STOP TIME dial must be set and advanced beyond the time noted on oven clock. |
|
|
| ● The STOP TIME dial was not advanced for long enough. |
|
|
| ● Both OVEN SET and OVEN TEMP knobs must be set at CLEAN setting. |
|
|
| c During the |
|
|
| heavy layer of ash that can insulate the area from further heat. |
|
|
| ● Latch handle not moved to the right. |
OVEN DOOR |
|
| . Oven may be too hot from previous use. Open oven door to cool oven. When oven |
WON’T LATCH |
|
| has cooled, latch handle can again be moved. |
|
|
| ● OVEN SET knob must be at CLEAN or OFF before latch handle can be moved. |
|
|
|
|
If you need more help... call, toll free: GE Answer Center
800.626.2000”
consumer information service
26
——.