GE JGB920 installation instructions Provide Adequate GAS Supply, Connect the Range to GAS

Page 45

Installation Instructions

1PROVIDE ADEQUATE GAS SUPPLY

Your range is designed to operate at a pressure of 4 ″ of water column on natural gas or, if designed for LP gas (propane or butane), 10 ″ of water column.

Make sure you are supplying your range with the type of gas for which it is designed.

This range is convertible for use on natural or propane gas. If you decide to use this range on LP gas, conversion must be made by a qualified LP installer before attempting to operate the range on that gas.

For proper operation, the pressure of natural gas supplied to the regulator must be between 4″ and 13″ of water column.

For LP gas, the pressure supplied must be between 10″ and 13″ of water column.

When checking for proper operation of the regulator, the inlet pressure must be at least 1″ greater than the operating (manifold) pressure as given above.

The pressure regulator located at the inlet of the range manifold must remain in the supply line regardless of whether natural or LP gas is being used.

A flexible metal appliance connector used to connect the range to the gas supply line should have an I.D. of 1/2″ and be 5 feet in length for ease of installation. In Canada, flexible connectors must be single wall metal connectors no longer than 6 feet in length.

2CONNECT THE RANGE TO GAS

Shut off the main gas supply valve before disconnecting the old range and leave it off until the new hook-up has been completed. Don’t forget to relight the pilot on other gas appliances when you turn the gas back on.

Because hard piping restricts movement of the range, the use of a CSA International-certified flexible metal appliance connector is recommended unless local codes require a hard-piped connection.

Never use an old connector when installing a new range. If the hard piping method is used, you must carefully align the pipe; the range cannot be moved after the connection is made.

To prevent gas leaks, put pipe joint compound on, or wrap pipe thread tape with Teflon* around, all male (external) pipe threads.

A. Install a manual gas line shut-off valve in the gas line in an easily accessed location outside of the range. Make sure everyone operating the range knows where and how to shut off the gas supply to the range.

B. Install male 1/2″ flare union adapter to the 1/2″ NPT internal thread at inlet of regulator. Use a backup wrench on the regulator fitting to avoid damage.

When installing the range from the front, remove the 90° elbow for easier installation.

C. Install male 1/2″ or 3/4″ flare union adapter to the NPT internal thread of the manual shut-off valve, taking care to back-up the shut-off valve to keep it from turning.

D. Connect flexible metal appliance connector to the adapter on the range. Position range to permit connection at the shut-off valve.

E. When all connections have been made, make sure all range controls are in the off position and turn on the main gas supply valve. Use a liquid leak detector at all joints and connections to check for leaks in the system.

WARNING: DO NOT USE A FLAME TO CHECK FOR GAS LEAKS.

When using test pressures greater than 1/2 psig to pressure test the gas supply system of the residence, disconnect the range and individual shut-off valve from the gas supply piping. When using test pressures of 1/2 psig or less to test the gas supply system, simply isolate the range from the gas supply system by closing the individual shut-off valve.

*Teflon: Registered trademark of DuPont

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Write the model and serial numbers here Model # Serial # Installation InstructionsANTI-TIP Device Consumer Support TroubleshootingSafety Instructions Operating Instructions Important Safety NoticeInstructions Surface Burners Installation Instructions Operating Instructions Safety Consumer Support Troubleshooting TipsCook Meat and Poultry THOROUGHLY… Troubleshooting Tips ConsumerUsing the gas surface burners Troubleshooting Tips InstallationInstructions Operating Consumer Support Installation Instructions Troubleshooting TipsOven Control, Clock and Timer Features on some models Using the oven controlsOven Light Pad on some models Troubleshooting Tips Consumer SupportUsing the oven Installation Instructions OperatingTroubleshooting Tips Preheating and Pan Placement How to Set the Oven for Baking or RoastingAluminum Foil Oven MoistureBroiling Guide How to Set the Oven for BroilingBroiling Guide HI BroilTo Set the Timer Using the clock and timerTo Reset the Timer To Cancel the TimerConsumer Support Troubleshooting Tips Installation Using the timed baking and roasting featuresHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopHow to Set the Oven For Cooking When Using the Probe Using the probe. on some modelsInstallation Instructions Operating Instructions Safety Using the convection oven. on some modelsConvection Bake Convection RoastHow to Set the Oven for Convection Baking or Roasting Troubleshooting Tips Consumer SupportMulti-Shelf Baking Touch the Convection Bake orTouch the Convection Roast pad Operating Instructions SafetyConvection Roasting Guide Using the timed convection baking features. on some models Installation Instructions Operating InstructionsTouch the Convection Bake pad Safety Instructions Special features of your oven controlFahrenheit or Celsius Temperature Selection Hour Shut-OffControl Lockout on some models Cook and HoldCooking function is finished Instructions Troubleshooting Tips Consumer Support Using the Sabbath FeatureHow to Set for Regular Baking/Roasting Designed for use on the Jewish Sabbath and HolidaysHow to Exit the Sabbath Feature Safety Instructions Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat Type of margarine will affect baking performanceWhen Using the Warming Drawer Using the electric warming drawer. on some modelsWarming drawer cannot be used during a self-clean cycle To Use the Warming DrawerTemperature Selection Chart Instructions Operating Instructions InstallationTo Crisp Stale Items To Warm Serving Bowls and PlatesConsumer Support Troubleshooting Tips Installation Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning After a Clean CycleSealed Burner Assemblies Care and cleaning of the rangeReplacement After cleaningBurner Caps and Heads Burner capsBurner Grates CleaningTo Order Do not use a steel-wool pad it will scratch the surfaceNormal Daily Use Cleaning Cleaning the glass cooktop. on some modelsBurned-On Residue Heavy, Burned-On ResidueCooktop Seal Damage from Sugary Spills and Melted PlasticTo Order Parts Lift-Off Oven Door Troubleshooting TipsOven Bottom Broiler Pan and GridWarming Drawer Pan on some models Removable DrawerTo remove the drawer To replace the drawer Unlock the touch pads after cleaning Safety Instructions OperatingOven Air Vents Upper Control PanelOven Shelves Oven Light ReplacementTo remove Do not remove any screws to remove the coverFor Your Safety Tools YOU will NeedMaterials YOU MAY Need Electrical Connections in this section Installation InstructionsMinimum Wall on Either side Dimensions and ClearancesLocation ANTI-TIP DeviceConnect the Range to GAS Provide Adequate GAS SupplyGAS Pipe and Electrical Outlet Locations Rigid Pipe Hookup Options Flexible Connector HookupElectrical Requirements Electrical ConnectionsCheck Ignition of Surface Burners Seal the OpeningsCheck Ignition of Oven Burner To remove the oven bottom Leveling the RangeWhen ALL Hookups are Completed Installing the ANTI-TIP DeviceBefore You Call For Service… Oven temperature Control signals afterClock and timer Entering cooking timeAfter a clean cycle Oven not clean after a See the Using the self-cleaning oven sectionClean cycle Is on when you wantDisplay goes blank Power outageDisplay flashes Unable to getLooking For Something More? AccessoriesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Operating Instructions Installation Instructions Troubleshooting Tips Installation Instructions Safety Instructions What GE Will Not Cover GE Will ReplaceUnder the warranty Safety Instructions Operating InstructionsCamco Will Replace What Camco Will Not CoverConsumer Support GE Appliances Website Schedule Service
Related manuals
Manual 64 pages 49.5 Kb

JGB920 specifications

The GE JGB920 is a top-of-the-line gas range that embodies advanced features and modern cooking technologies, making it a favorite among culinary enthusiasts and home cooks alike. One of its standout characteristics is the powerful stainless steel construction, which not only delivers a sleek and professional look but also ensures durability and easy maintenance.

One of the primary features of the GE JGB920 is its convection oven, which uses a fan to circulate hot air, providing even cooking results for all dishes. This technology is especially beneficial for baking, as it aids in creating consistent browning and prevents hot spots. Additionally, the oven boasts a generous capacity, allowing users to prepare multiple dishes simultaneously or accommodate larger roasts.

The JGB920 also features a variety of cooking modes, including bake, broil, and even specialized settings like a self-cleaning function. This feature automates the cleaning process, using high temperatures to eliminate food residues, thus simplifying post-cooking cleanup.

The range is equipped with a precise temperature control system, allowing for accurate adjustments for various cooking methods. The integrated electronic ignition ensures a reliable start-up, while the gas burners provide responsive heat adjustment, enabling users to achieve the desired cooking temperatures efficiently.

Another significant aspect of the GE JGB920 is its Smart technology capability. By connecting to a home network, users can control the range remotely via a smartphone app. This feature allows for preheating the oven or adjusting cooking settings from the comfort of another room, adding convenience to the cooking process.

The cooktop itself is designed with versatility in mind. It offers multiple burner sizes, including a powerful high-heat burner for boiling and a simmer burner for delicate sauces. This flexibility meets various cooking demands, from searing to simmering, enhancing the range's overall functionality.

Safety is also a priority in the design of the GE JGB920. The range includes a variety of safety features, such as a gas safety valve and a child lock, ensuring peace of mind for families.

In summary, the GE JGB920 gas range successfully combines innovative cooking technologies with user-friendly features and a stylish design. Its convection oven, smart technology integration, and versatile cooktop options make it an excellent choice for any kitchen, elevating the cooking experience to new heights.
Top Page Image Contents