Verona VEFSGE 304 SC manual What to do if YOU Smell GAS

Page 2

2

WARNING !

To reduce the risk of tipping the appliance, the appliance must be secured by properly installed anti-tip device packed with the appliance.

• ALL RANGES CAN TIP

INJURY TO PERSONS COULD RESULT

INSTALL ANTI-TIP DEVICE PACKED WITH RANGE

SEE INSTALLATION INSTRUCTIONS

WARNING !

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death.

––Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

––NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poiso- ning and overheating of the appliance.

––WHAT TO DO IF YOU SMELL GAS:

Do not try to light any appliance.

Do not touch any electrical switch.

Do not use any phone in your building.

lmmediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

lf you cannot reach your gas supplier, call the fire depart- ment.

––Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

Image 2
Contents GAS/ELECTRIC Range What to do if YOU Smell GAS Data Plate Conversion Label Installation Instructions Replacement Parts Electrical Grounding InstructionsInstallation Proximity to Side CabinetsIt is mandatory to install the backguard Assembling the BackguardProximity to Side Cabinets Standard Installation Proximity to Side Cabinets Island Installation ANTI-TIP Stability Device Installation Instructions Levelling the RangeInstalling the Cooktop Front Guard Explosion Hazard Manual Shut-off Valve figPressure Regulator Pressure Regulator Installation Step GAS Connection Speficication Rigid Pipe Connections Leak TestingFlexible Connections Setting the Pressure Regulator To set the pressure regulator figOperations to be Performed When Substituting the Injectors Injectors TableSetting the Burner Minimum Semirapid burnerElectrical Connection with Conduit Electrical Connection with Power CordElectrical Requirements Wire Power Cord Installation See Figure =1 9/64 29 mm =7/8 22.5 mm Power CordWire Conduit Installation See Figure Plug the terminal holes of conductorsWiring Diagram Electric Diagram KEY