Southbend S560DD, X560AA, X536D, X536A, S536D, X560AD BRIGHT-ANNEALED STAINLESS-STEEL Surfaces

Page 12

CLEANING & MAINTENANCE

500 SERIES RESTAURANT RANGES

STAINLESS-STEEL SURFACES

To remove normal dirt, grease and product residue from stainless steel surfaces that operate at LOW temperature, use ordinary soap and water (with or without detergent) applied with a sponge or cloth. Dry thoroughly with a clean cloth.

To remove BAKED-ON grease and food splatter, or condensed vapors; apply cleanser to a damp cloth or sponge and rub cleanser on the metal in the direction of the polishing lines on the metal. Rubbing cleanser, as gently as possible, in the direction of the polished lines will not mar the finish of the stainless steel. NEVER RUB WITH A CIRCULAR MOTION. Soil and burnt deposits which do not respond to the above procedure can usually be removed by rubbing the surface with SCOTCH-BRITE scouring pads or STAINLESS scouring pads. DO NOT USE ORDINARY STEEL WOOL as any particles left on the surface will rust and further spoil the appearance of the finish. NEVER USE A WIRE BRUSH, STEEL SCOURING PADS (EXCEPT STAINLESS), SCRAPER, FILE OR OTHER STEEL TOOLS. Surfaces which are marred collect dirt more rapidly and become more difficult to clean. Marring also increases the possibility of corrosive attack. Refinishing may then be required.

“Heat tint” is darkened areas that sometimes appear on stainless steel surfaces where the area has been subjected to excessive heat. These darkened areas are caused by thickening of the protective surface of the stainless steel and are not harmful. Heat tint can normally be removed by the foregoing, but tint which does not respond to this procedure calls for a vigorous scouring in the direction of the polish lines using SCOTCH-BRITE scouring pads or a STAINLESS scouring pad in combination with a powered cleanser. Heat tint may be lessened by reducing heat to equipment during slack periods.

BRIGHT-ANNEALED STAINLESS-STEEL SURFACES

To remove normal dirt, grease and product residue from stainless steel surfaces that operate at LOW temperature, use ordinary soap and water (with or without detergent) applied with a sponge or cloth. Dry thoroughly with a clean cloth.

Never use any abrasive cleaner, pad, wire brush, scrapper, or file to remove material from the bright-annealed surfaces.

PAGE 12 OF 44

OWNER’S MANUAL 1188716 (02/07)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Restaurant Ranges Safety Precautions Introduction Location of Serial PlateSpecifications DimensionsClearances Dimensions Interior Dimensions and Utility Data VentilationGAS Supply Electrical RequirementsOperation Lighting After GAS has Been Shut OFFOperation of TOP Burners Operation of OvenTroubleshooting by Operator Troubleshooting CONVECTION-OVEN Cooking ProblemsShutdown of Entire Range Cooking Tips for Convection Ovens Cleaning & Maintenance Daily CleaningCleaning Oven Interior Periodic Cleaning and MaintenanceSTAINLESS-STEEL Surfaces BRIGHT-ANNEALED STAINLESS-STEEL SurfacesInstallation UnpackingInstallation of Legs UnpackingAttach Legs Installation of Casters Attach Casters and RestraintInstallation of Restraint Installation of Flue Riser and Shelf Assembly Attach Flue Riser and Shelf AssemblyElectrical Connection for CONVECTION-OVEN Models only GAS ConnectionCheck the Installation SHUT-DOWN and WIPE-CLEAN RangeCheck Operation Service Troubleshooting FLOWCHARTS, PROCEDURES, and Wiring DiagramsTroubleshooting Open-Top Burners Troubleshooting OPEN-TOP BurnersTroubleshooting Oven Pilot Troubleshooting Base OvenTroubleshooting CONVECTION-OVEN Blower Convection-Oven Blower Runs IntermittentlyConvection-Oven Blower Does Not Run Is there continuity? Yes Continue on nextAdjustment of GAS Pressure Regulator Check That Power is Disconnected AT Circuit BreakerAdjustment of OPEN-TOP Pilots Adjustment of OPEN-TOP BurnersAdjustment of Oven Standing Pilot Adjustment of Oven BurnerCalibration of Oven Thermostat Thermostat Calibration and Bypass Flame Adjustment Conversion from ONE Type of GAS to AnotherWiring Diagram for 115 Volt Models Wiring Diagram for 208-230 Volt Models Leg and Caster Parts PartsExternal Panel and Drip Pan Parts Flue Riser and Shelf Parts Open-Top Burner Parts for X500 Models 1187489Open-Top Burner Parts for S500 Models Piezo Spark Module Parts 1186454Convection Oven Parts See parts list on previous 2221 Standard Oven Parts See parts list on previous VALVE, GAS Shutoff NIPPLE, Pipe REGULATOR, Pressure Series Restaurant Ranges Series Restaurant Ranges Series Restaurant Ranges Restaurant Ranges

X560DD S536A, S560AD, S560AA, X560AD, S536D specifications

Southbend, a well-established name in the commercial kitchen equipment industry, offers a variety of high-quality cooking appliances, including the X560AA, X536D, X536A, S560DD, and S536D models. Each of these models is designed to meet the rigorous demands of professional kitchens while delivering exceptional performance.

The Southbend X560AA is a robust gas range featuring six heavy-duty burners, a large oven, and a durable stainless steel construction. Its powerful burners provide precise temperature control, making it ideal for a wide range of cooking techniques from simmering to high-heat frying. The oven is spacious enough to accommodate large trays, enabling efficient cooking of multiple items simultaneously. This model also boasts an easy-clean design, ensuring that maintenance and upkeep are hassle-free.

The X536D model is distinguished by its unique combination of an oven and a griddle, offering versatility without sacrificing quality. Equipped with a powerful charbroiler, the X536D allows chefs to prepare a variety of dishes simultaneously, making it a perfect addition to busy kitchens. Its intuitive controls facilitate quick adjustments, and the griddle's non-stick surface ensures consistent cooking results.

Similarly, the Southbend X536A combines an oven with a unique steam cooking feature, ideal for steaming vegetables and seafood while retaining essential nutrients. This model includes advanced safety mechanisms and ergonomic controls that enhance user experience. The X536A stands out for its energy efficiency, which not only reduces operational costs but also promotes environmentally friendly practices.

The S560DD and S536D are part of Southbend's heavy-duty series, designed for increased durability and performance. The S560DD features double ovens, allowing for simultaneous cooking at different temperatures, which is crucial for maximizing productivity in the kitchen. It includes high-efficiency burners that provide quick heat-up times and reduce gas consumption.

The S536D is renowned for its exceptional versatility, featuring six burners, a spacious oven, and a practical griddle top. Designed for high-output cooking, it's ideal for restaurants and catering services that require speed and efficiency. All models come with user-friendly controls, easy cleanup features, and solid construction that meet the high standards of professional chefs.

In summary, Southbend's X560AA, X536D, X536A, S560DD, and S536D models exemplify the brand's commitment to quality, innovation, and performance. Equipped with advanced technologies, these ranges are not only reliable but also adaptable to the dynamic needs of commercial kitchens, ensuring that chefs can focus on creativity and culinary excellence.
Top Page Image Contents