Southbend S536D, X560AA, X536D, X536A, S560DD, X560AD, S560AA, S560AD Installation, Unpacking

Page 13

500 SERIES RESTAURANT RANGES

INSTALLATION

INSTALLATION

NOTICE

These installation procedures must be followed by qualified personnel or warranty will be void.

Local codes regarding installation vary greatly from one area to another. The National Fire Protection Association, Inc., states in its NFPA 96 latest edition that local codes are the “authority having jurisdiction” when it comes to installation requirements for equipment. Therefore, installations should comply with all local codes.

The installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1, Natural Gas Installation Code, CAN/CGA-B149.1, or the Propane Installation Code CAN/CGA- B149.2, as applicable, including:

1.The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.45 kPa).

2.The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.45 kPa).

NOTICE

EXHAUST FANS AND CANOPIES: It is recommended that the range be installed under a ventilation hood. Consult local codes for proper installation of hoods. Proper ventilation is the owner’s responsibility. Any problem due to improper ventilation will not be covered by warranty.

NOTICE

In the Commonwealth of Massachusetts all gas appliances vented by either mechanical systems or ventilation hoods shall comply with 248 CMR interlocking requirements.

STEP 1: UNPACKING

IMMEDIATELY INSPECT FOR SHIPPING DAMAGE

All containers should be examined for damage before and during unloading. The freight carrier has assumed responsibility for its safe transit and delivery. If damaged equipment is received, either apparent or concealed, a claim must be made with the delivering carrier.

Apparent damage or loss must be noted on the freight bill at the time of delivery. The freight bill must then be signed by the carrier representative (Driver). If the bill is not signed, the carrier may refuse the claim. The carrier can supply the necessary forms.

A request for inspection must be made to the carrier within 15 days if there is concealed damage or loss that is not apparent until after the equipment is uncrated. The carrier should arrange an inspection. Be certain to hold all contents plus all packing material.

Do the following:

1.Cut the banding straps and remove the corrugated cardboard surrounding the range. If legs were shipped in the same container, set them aside for installation in later steps of this procedure. Do not remove any tags or labels attached to the range until the range is installed and working properly.

2.Lift the flue riser off the front of the skid (see Figure 3) and set it aside for installation later in this procedure.

3.Pull the shelf assembly out from under the base and set it aside for installation later in this procedure.

4.Unbolt the shipping hold-down brackets from the skid, then remove the brackets from the range.

5.If the range is to be installed on legs, go to Step 2a.

If the range is to be installed on casters, go to Step 2b.

OWNERS MANUAL 1188716 (02/07)

PAGE 13 OF 44

Image 13
Contents Restaurant Ranges Safety Precautions Location of Serial Plate IntroductionDimensions SpecificationsClearances Dimensions Ventilation Interior Dimensions and Utility DataElectrical Requirements GAS SupplyLighting After GAS has Been Shut OFF OperationOperation of TOP Burners Operation of OvenTroubleshooting CONVECTION-OVEN Cooking Problems Troubleshooting by OperatorShutdown of Entire Range Cooking Tips for Convection Ovens Daily Cleaning Cleaning & MaintenanceCleaning Oven Interior Periodic Cleaning and MaintenanceBRIGHT-ANNEALED STAINLESS-STEEL Surfaces STAINLESS-STEEL SurfacesUnpacking InstallationUnpacking Installation of LegsAttach Legs Attach Casters and Restraint Installation of CastersInstallation of Restraint Attach Flue Riser and Shelf Assembly Installation of Flue Riser and Shelf AssemblyElectrical Connection for CONVECTION-OVEN Models only GAS ConnectionSHUT-DOWN and WIPE-CLEAN Range Check the InstallationCheck Operation Troubleshooting FLOWCHARTS, PROCEDURES, and Wiring Diagrams ServiceTroubleshooting OPEN-TOP Burners Troubleshooting Open-Top BurnersTroubleshooting Base Oven Troubleshooting Oven PilotConvection-Oven Blower Runs Intermittently Troubleshooting CONVECTION-OVEN BlowerIs there continuity? Yes Continue on next Convection-Oven Blower Does Not RunCheck That Power is Disconnected AT Circuit Breaker Adjustment of GAS Pressure RegulatorAdjustment of OPEN-TOP Burners Adjustment of OPEN-TOP PilotsAdjustment of Oven Standing Pilot Adjustment of Oven BurnerCalibration of Oven Thermostat Conversion from ONE Type of GAS to Another Thermostat Calibration and Bypass Flame AdjustmentWiring Diagram for 115 Volt Models Wiring Diagram for 208-230 Volt Models Parts Leg and Caster PartsExternal Panel and Drip Pan Parts Flue Riser and Shelf Parts 1187489 Open-Top Burner Parts for X500 ModelsOpen-Top Burner Parts for S500 Models 1186454 Piezo Spark Module PartsConvection Oven Parts See parts list on previous 2221 Standard Oven Parts See parts list on previous VALVE, GAS Shutoff NIPPLE, Pipe REGULATOR, Pressure Series Restaurant Ranges Series Restaurant Ranges Series Restaurant Ranges Restaurant Ranges

X560DD S536A, S560AD, S560AA, X560AD, S536D specifications

Southbend, a well-established name in the commercial kitchen equipment industry, offers a variety of high-quality cooking appliances, including the X560AA, X536D, X536A, S560DD, and S536D models. Each of these models is designed to meet the rigorous demands of professional kitchens while delivering exceptional performance.

The Southbend X560AA is a robust gas range featuring six heavy-duty burners, a large oven, and a durable stainless steel construction. Its powerful burners provide precise temperature control, making it ideal for a wide range of cooking techniques from simmering to high-heat frying. The oven is spacious enough to accommodate large trays, enabling efficient cooking of multiple items simultaneously. This model also boasts an easy-clean design, ensuring that maintenance and upkeep are hassle-free.

The X536D model is distinguished by its unique combination of an oven and a griddle, offering versatility without sacrificing quality. Equipped with a powerful charbroiler, the X536D allows chefs to prepare a variety of dishes simultaneously, making it a perfect addition to busy kitchens. Its intuitive controls facilitate quick adjustments, and the griddle's non-stick surface ensures consistent cooking results.

Similarly, the Southbend X536A combines an oven with a unique steam cooking feature, ideal for steaming vegetables and seafood while retaining essential nutrients. This model includes advanced safety mechanisms and ergonomic controls that enhance user experience. The X536A stands out for its energy efficiency, which not only reduces operational costs but also promotes environmentally friendly practices.

The S560DD and S536D are part of Southbend's heavy-duty series, designed for increased durability and performance. The S560DD features double ovens, allowing for simultaneous cooking at different temperatures, which is crucial for maximizing productivity in the kitchen. It includes high-efficiency burners that provide quick heat-up times and reduce gas consumption.

The S536D is renowned for its exceptional versatility, featuring six burners, a spacious oven, and a practical griddle top. Designed for high-output cooking, it's ideal for restaurants and catering services that require speed and efficiency. All models come with user-friendly controls, easy cleanup features, and solid construction that meet the high standards of professional chefs.

In summary, Southbend's X560AA, X536D, X536A, S560DD, and S536D models exemplify the brand's commitment to quality, innovation, and performance. Equipped with advanced technologies, these ranges are not only reliable but also adaptable to the dynamic needs of commercial kitchens, ensuring that chefs can focus on creativity and culinary excellence.