Moyer Diebel MH-60M3, MH-6NM3 Standard Equipment includes, Options MH-60 only, Accessories

GENERAL

Model Numbers

MH-60, MH-6N, MH-6L

The MH-60 model is a high temperature (180°F/82°C rinse) sanitizing model with booster.

The MH-6N model is a high temperature (180°F/82°C rinse) sanitizing model without booster.

The MH-6L is a low temperature (Min. 120°F/ 49°C-140°F/60°C Optimum) sanitizing model for use with a sodium hypochlorite (Chlorine) based sanitizer at a minimum concentration of 50 PPM in the final rinse.

Standard Equipment includes:

MH-60, MH-6N, MH-6L

•Automatic tank fill and start

•Built-in electric booster heater (MH-60 only)

•Field convertible to corner model

•Electric tank heat

•Balanced three door lift system

•Low-water tank heat protection

•1-hp drip-proof pump motor

•Door safety switch

Options (MH-60 only)

•Electric booster (70°F/39°C temperature rise) heater for 110°F/43°C supply water

•Steam injector or steam coil tank heat (steam booster 40°F/23°C-70°F/39°C rise)

•Common utility connections

•Two dish racks (peg and flat bottom)

•Detergent/chemical connection provisions

•Stainless steel front and side panels

•60-second time cycle

•1-1/2" O.D. gravity drain connection

•Water pressure reducing valve (MH-60 only)

•Interchangeable upper and lower spray arms

Accessories

Additional dishracks:
Dish rack (peg)	P/N 101285
Silverware rack (flat bottom)	P/N 101273
3/4" Pressure reducing valve (PRV)	P/N 112387

6