Market Forge Industries 30-stel-lx technical manual Threaded ROD

Page 28

SECTION 7 OPTIONS PARTS LIST

TRIM JOINTING KIT INSTALLATION INSTRUCTIONS

FORM NUMBER: S-2417

1.Thread Item 1 (Refer to Drawing 98-1517) 3/8-16 Threaded Bolt thru Riv-nut on the lower left side of the skillet so that there is enough room to secure Washer (Item 3)and Nut (Item 2) on the inside of the skillet. Refer to figure 1.2. Secure Threaded Bolt (Item 1)into place using Washer (Item 3) and Nut (Item 2) hand tighten washer and nut into place. Repeat this procedure for all upper mounting holes. (4 places)

2.Use additional Washers (Item 2) and Nuts (Item 3) provided with kit to adjust and use as spacers where needed during assembly.

3.If feasible at this time align skillet with adjoining unit. Threaded Bolt (Item 1) should slide thru mounting location provided on allGF Market Forge modular assembly frames. Attach using Washers (Item 3) and Nuts (Item 2) to inside of adjoining unit. Hand tighten washer and nut into place. Repeat this procedure for all lower mounting holes. (4 places) (See Fig 7.9)

TABLE FOR FIG. 7.9

ITEM

PART NO.

DESCRIPTION

QTY.

 

 

 

 

1￿

98-0969￿

3/8-16 THREADED ROD

4￿

2￿

10-2317￿

3/8-16 HEX NUT

13￿

3￿

10-2401

3/8 WASHER

13

FIG. 7.9 CROSS SECTION

4.After all eight Threaded Rods (Item 1) have been hand tightened, reinstall all modular frame enchancements provided with the Universe Skillet.

5.Tighten and secure all nuts.

6.Refer to Installation & Operating Instructions before using unit.

7.Mount Frame Cover (Item #`1) to left side of frame positioning slots over 3/8-16 Threaded Rod. Do Not tighten threaded rod at this time. (See Fig 7.10)

8.Mount Spacer, Modular Frame (Item #2) by securing to adjoining unit with #10-32 Self Tapping Screw or Nut and bolt as required. Mounting holes are found on adjoining frame base. Fits both left and right side opening doors. (See Fig 7.10)

￿

9.Tighten and secure all nuts.

10.Refer to Installation & Operating Instructions before using unit.

7-9

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Electric Frying & Braising PAN Table of Contents Summary of Safety Notices General Information DescriptionService Equipment FoodInstallation Instructions Models 40-STEL, 40-STEL-LX, 40-STEM & 40-STEM-LX98-1256 D 98-12562 D 98-12563 D Cleaning Operating InstructionsIntroduction Basic Functions SHUT-DOWNTest Kitchen Bulletin Cooking Facts on ParadeBreakfast Foods Size Setting PER Hour QTY Yeild Portion Thermostat BatchesIllustrated Parts List TOP AssemblyGallon Gallon Description QTYTOP Assembly PAN Assembly Gallon DescriptionNema BOX Assembly Description QTYTroubleshooting & Maintenance Problem Probable Cause Remedy ART noReplacement of Temperature Control Options Parts List Single Pantry FaucetDouble Pantry Faucet Double Pantry FaucetSingle Spray Hose Single Spray HoseDouble Spray Hose Double Spray HosePAN Support PAN SupportOptional Casters with GAS Strain Relief Table for FIG Modular OptionsModular Instructions Trim Jointing KIT Options Modular StandThreaded ROD SPRING, Spray HOSE, Gooseneck PAN, 30 GALLON, UNI. Skillet

30-stel, 30-stel-lx specifications

Market Forge Industries is a renowned manufacturer specializing in high-quality steam cooking equipment, and among their impressive lineup is the 30-STEL-LX and 30-STEL models. These products stand out in the industry, known for their distinct features, advanced technologies, and robust characteristics that cater to the demands of commercial kitchens.

The 30-STEL-LX and 30-STEL steamers are designed to meet the needs of food service establishments that require efficiency and speed in cooking. Both models boast a user-friendly control panel, making it easy for chefs and kitchen staff to operate them with precision. They come equipped with programmable controls that allow users to set cooking times and temperatures based on specific menu items, ensuring consistency and quality in food preparation.

One of the key aspects of the 30-STEL-LX and 30-STEL is their construction. Built with heavy-duty stainless steel, they offer durability and resistance to corrosion. This material is not only robust but also easy to clean, a significant advantage for busy kitchens where hygiene is paramount. The steamers' compact design allows them to fit into various kitchen layouts without sacrificing performance.

In terms of technology, these models utilize direct steam injection, which provides rapid and efficient cooking. This method ensures that food is cooked evenly and quickly, reducing the overall cooking time and preserving the natural flavors and nutrients of the ingredients. The steamers also include advanced safety features, such as automatic shut-off systems and pressure controls, promoting safe operation.

Another remarkable characteristic of the 30-STEL-LX and 30-STEL is their versatility. They are capable of cooking a wide range of foods, from vegetables and seafood to poultry and grains, making them ideal for diverse menus in restaurants, schools, and catering services. The ability to cook multiple items simultaneously maximizes kitchen efficiency and allows chefs to manage their time effectively.

Overall, the Market Forge Industries 30-STEL-LX and 30-STEL steamers represent a perfect blend of durability, versatility, and user-friendly technology. They enable food service professionals to deliver high-quality meals while optimizing their kitchen operations. Businesses seeking reliable and efficient cooking solutions will find these models to be invaluable assets in their culinary repertoire.
Top Page Image Contents