Sonos Optimizing the Loudness Setting for Your System

Page 13

SONOS PLAYBAR

11

Using the Sonos Controller for Mac or PC

1.Select Manage ->Settings (PC) or Sonos ->Preferences (Mac).

2.Select Room Settings if it is not already highlighted on the left.

3.Choose the room the PLAYBAR is located in from the Room Settings for drop-down.

4.Select the TV Setup tab.

5.Click Remote Control Setup.

6.Pick up the remote control you wish to begin using with the PLAYBAR, and then click Next.

7.Point the remote at the PLAYBAR and press the Volume Up button on the remote control.

If the remote control is recognized, click Done. You can now use that remote to control the volume and mute settings on your PLAYBAR.

If the remote control is not recognized, you will be prompted to make additional button presses to complete the setup process.

If a message appears on the television whenever you adjust the volume up and down, please see "Eliminating annoying messages on your TV when using a cable, satellite, or set top box remote" on page 24 or "Eliminating annoying messages on your TV when using a universal remote" on page 26.

Equalization (EQ)

During the PLAYBAR setup process you were guided through the audio calibration process. If desired, you can change the sound settings (bass, treble or loudness) for the SONOS PLAYBAR. Bass boosts lower frequencies, treble boosts higher frequencies, while loudness boosts certain frequencies, including bass, to improve the sound at low volume.

Any manual EQ changes you make will be reset whenever you go through the audio recalibration process (see page 12 for more information).

Using a handheld Sonos controller

1.From the Settings menu, select Room Settings.

2.Select the room you want to adjust.

3.Select Equalization.

4.Choose one of the following options:

Drag your finger across the bass or treble sliders to make adjustments.

Select On or Off to adjust the Loudness setting.

Using the Sonos Controller for Mac or PC

1.Select Manage ->Settings (PC) or Sonos ->Preferences (Mac).

2.Select Room Settings if it is not already highlighted on the left.

3.Choose the room the PLAYBAR is located in from the Room Settings for list, and then select the EQ tab.

4.Choose one of the following options:

Click and drag the bass or treble sliders to make adjustments.

Click the Loudness checkbox to turn the loudness setting on or off.

5.Close the Settings window when changes are complete.

Image 13
Contents Sonos Playbar By Sonos, Inc. All rights reserved What’s in the Box Sonos PlaybartmTelevision requirements What’s RequiredHome network requirements Your home network must meet the following requirementsBefore You Begin Playbar Front Status Indicator LightDigital Audio In Optical Playbar BackTabletop Selecting a LocationWall mounting Setting Up the Playbar Product Guide If you are adding to an existing Sonos system Add the Sonos component that’s connected to your routerIf you’d like additional assistance Remote control setup Playbar SettingsUsing a handheld Sonos controller Select Room Settings from the Settings menuSelect Manage -Settings PC or Sonos -Preferences Mac Using the Sonos Controller for Mac or PCClick Remote Control Setup Equalization EQSelect Advanced Audio TV Dialog Settings TV dialog settingsRecalibrating the audio Select Advanced Audio Recalibrate AudioAdditional TV sound options Select TV Setup and Control TV AutoplayTV autoplay Speech EnhancementSelect TV Setup and Control Ungroup on Autoplay IR signal lightSelect TV Setup and Control IR Signal Light Ungroup on autoplayIR repeater Select TV Setup and Control IR RepeaterWhite status light Select White Status LightAdding a Sonos SUB Changing room namesSelect Room Name Select Advanced Audio SUB Settings SUB settingsPlacement Adjustment phase Select On or Off Removing a SUBSurround Speakers Surround settingsAdding surround speakers Select Remove Surround Speakers Removing surround speakersPlaying Music What you will need Wall MountingRemove the template from the wall Drill pilot holes Sonos Playbar Playbar not detected during setup Basic TroubleshootingIdentify an unused device key Customer SupportVerify that the problem is solved Lock your remote control to the new volume commandsSee Remote control setup on page 10 for help with this step Program the unused device keyIf you are using another universal remote If you are using a Logitech universal remoteCan’t turn off TV speakers Turning Off Your Television’s SpeakersPlaybar Status Indicator State Additional Information Indicator Light ExplanationsCleaning & Maintenance Important Safety InformationLocation Proper VentilationHttp//support.directv.com Reference LinksSonos Playbar