Sonos PLAYBAR manual Playbar Front, Status Indicator Light

Page 6

4

Product Guide

PLAYBAR Front

Note: The grill cloth is not removable. Tampering with the cloth may damage your PLAYBAR.

Mute

Press the Mute button to mute or unmute the Sonos component.

Status Indicator Light

Indicates the status of the PLAYBAR.

 

When the PLAYBAR is in normal operation, the LED is white. If desired, you can adjust

 

this setting so the white light does not display. See "White status light" on page 15 for

 

more information.

 

For a complete list of status indications, see "Indicator Light Explanations" on page 28.

Volume Up (+)

Press these buttons to adjust the volume up and down.

Volume Down (-)

 

IR (InfraRed) Sensors / Signal Lights

The IR sensor receives the signals sent by a remote control.

 

When the PLAYBAR receives a volume or mute command, the IR signal light displays

 

momentarily. If desired, you can adjust this setting so the light never displays. See "IR

 

signal light" on page 14 for more information.

Image 6
Contents Sonos Playbar By Sonos, Inc. All rights reserved Sonos Playbartm What’s in the BoxHome network requirements What’s RequiredTelevision requirements Your home network must meet the following requirementsBefore You Begin Status Indicator Light Playbar FrontPlaybar Back Digital Audio In OpticalSelecting a Location TabletopWall mounting Setting Up the Playbar Product Guide Add the Sonos component that’s connected to your router If you are adding to an existing Sonos systemIf you’d like additional assistance Using a handheld Sonos controller Playbar SettingsRemote control setup Select Room Settings from the Settings menuClick Remote Control Setup Using the Sonos Controller for Mac or PCSelect Manage -Settings PC or Sonos -Preferences Mac Equalization EQRecalibrating the audio TV dialog settingsSelect Advanced Audio TV Dialog Settings Select Advanced Audio Recalibrate AudioTV autoplay Select TV Setup and Control TV AutoplayAdditional TV sound options Speech EnhancementSelect TV Setup and Control IR Signal Light IR signal lightSelect TV Setup and Control Ungroup on Autoplay Ungroup on autoplayWhite status light Select TV Setup and Control IR RepeaterIR repeater Select White Status LightChanging room names Adding a Sonos SUBSelect Room Name Placement Adjustment phase Select On or Off SUB settingsSelect Advanced Audio SUB Settings Removing a SUBSurround settings Surround SpeakersAdding surround speakers Removing surround speakers Select Remove Surround SpeakersPlaying Music Wall Mounting What you will needRemove the template from the wall Drill pilot holes Sonos Playbar Identify an unused device key Basic TroubleshootingPlaybar not detected during setup Customer SupportSee Remote control setup on page 10 for help with this step Lock your remote control to the new volume commandsVerify that the problem is solved Program the unused device keyIf you are using a Logitech universal remote If you are using another universal remoteTurning Off Your Television’s Speakers Can’t turn off TV speakersIndicator Light Explanations Playbar Status Indicator State Additional InformationLocation Important Safety InformationCleaning & Maintenance Proper VentilationReference Links Http//support.directv.comSonos Playbar