Sonos PLAYBAR manual Setting Up the Playbar

Page 9

SONOS PLAYBAR

7

Setting Up the PLAYBAR

The PLAYBAR is compatible with Sonos software versions 4.0 and later. If you are adding the PLAYBAR to an existing Sonos system, be sure to check for software updates before adding the PLAYBAR to your Sonos system.

1.Carefully unpack the package contents.

2.Choose a location for the PLAYBAR. Refer to "Selecting a Location" on page 6 for help with this step.

3.Remove the protective cap from each end of the optical audio cable.

4.Connect the optical audio cable (supplied) from your TV’s digital audio out (optical) to the PLAYBAR’s digital audio in (optical) being careful not to twist or bend the cable. The PLAYBAR’s digital audio in and the optical cable are ’D- shaped’—be sure to align for proper insertion.

IMPORTANT: Be sure to remove the protective caps from each end of the supplied optical audio cable before inserting.

5.Attach the power adapter to the PLAYBAR and apply power. Be sure to push the power cord firmly into the PLAYBAR until it is flush with the surface.

Image 9

Contents Sonos Playbar By Sonos, Inc. All rights reserved What’s in the Box Sonos PlaybartmTelevision requirements What’s RequiredHome network requirements Your home network must meet the following requirementsBefore You Begin Playbar Front Status Indicator LightDigital Audio In Optical Playbar BackSelecting a Location TabletopWall mounting Setting Up the Playbar Product Guide Add the Sonos component that’s connected to your router If you are adding to an existing Sonos systemIf you’d like additional assistance Remote control setup Playbar SettingsUsing a handheld Sonos controller Select Room Settings from the Settings menuSelect Manage -Settings PC or Sonos -Preferences Mac Using the Sonos Controller for Mac or PCClick Remote Control Setup Equalization EQSelect Advanced Audio TV Dialog Settings TV dialog settingsRecalibrating the audio Select Advanced Audio Recalibrate AudioAdditional TV sound options Select TV Setup and Control TV AutoplayTV autoplay Speech EnhancementSelect TV Setup and Control Ungroup on Autoplay IR signal lightSelect TV Setup and Control IR Signal Light Ungroup on autoplayIR repeater Select TV Setup and Control IR RepeaterWhite status light Select White Status LightChanging room names Adding a Sonos SUBSelect Room Name Select Advanced Audio SUB Settings SUB settingsPlacement Adjustment phase Select On or Off Removing a SUBSurround settings Surround SpeakersAdding surround speakers Select Remove Surround Speakers Removing surround speakersPlaying Music What you will need Wall MountingRemove the template from the wall Drill pilot holes Sonos Playbar Playbar not detected during setup Basic TroubleshootingIdentify an unused device key Customer SupportVerify that the problem is solved Lock your remote control to the new volume commandsSee Remote control setup on page 10 for help with this step Program the unused device keyIf you are using another universal remote If you are using a Logitech universal remoteCan’t turn off TV speakers Turning Off Your Television’s SpeakersPlaybar Status Indicator State Additional Information Indicator Light ExplanationsCleaning & Maintenance Important Safety InformationLocation Proper VentilationHttp//support.directv.com Reference LinksSonos Playbar