Sonos PLAYBAR manual Wall Mounting, What you will need

Page 23

SONOS PLAYBAR

21

Wall Mounting

PLAYBAR can be wall mounted above or below your wall-mounted television using the PLAYBAR Wall Mount Kit. To preserve audio quality, ensure the connector panel faces away from the TV when mounted—the SONOS logo should be farther from your TV.

Note: It is recommended that you connect the power and audio cables to the PLAYBAR before mounting on the wall.

What you will need

•PLAYBAR Wall Mount Kit (sold separately)

•Masking tape

•An awl or other pointed tool

•A Phillips head screw driver

•Power drill with Phillips head attachment

1.Hold the PLAYBAR wall mount template (included in the wall mount kit) in the desired position on your wall. The PLAYBAR can be mounted either above or below your television.

2“(50mm)

For best audio performance, be sure the connector panel faces AWAY from the TV when mounted.

1 “(25mm)

IMPORTANT: For optimal audio performance, Sonos recommends:

When mounting below a television, allow 1 inch (25mm) clearance between the PLAYBAR and the TV.

When mounting above a television, allow 2 inches (50mm) clearance between the PLAYBAR and the TV.

2.Use a level (included in wall mount kit) to ensure the template is horizontally level, and then tape the template securely to the wall.

Image 23

Contents Sonos Playbar By Sonos, Inc. All rights reserved What’s in the Box Sonos PlaybartmYour home network must meet the following requirements What’s RequiredTelevision requirements Home network requirementsBefore You Begin Playbar Front Status Indicator LightDigital Audio In Optical Playbar BackWall mounting Selecting a LocationTabletop Setting Up the Playbar Product Guide If you’d like additional assistance Add the Sonos component that’s connected to your routerIf you are adding to an existing Sonos system Select Room Settings from the Settings menu Playbar SettingsRemote control setup Using a handheld Sonos controllerEqualization EQ Using the Sonos Controller for Mac or PCSelect Manage -Settings PC or Sonos -Preferences Mac Click Remote Control SetupSelect Advanced Audio Recalibrate Audio TV dialog settingsSelect Advanced Audio TV Dialog Settings Recalibrating the audioSpeech Enhancement Select TV Setup and Control TV AutoplayAdditional TV sound options TV autoplayUngroup on autoplay IR signal lightSelect TV Setup and Control Ungroup on Autoplay Select TV Setup and Control IR Signal LightSelect White Status Light Select TV Setup and Control IR RepeaterIR repeater White status lightSelect Room Name Changing room namesAdding a Sonos SUB Removing a SUB SUB settingsSelect Advanced Audio SUB Settings Placement Adjustment phase Select On or OffAdding surround speakers Surround settingsSurround Speakers Select Remove Surround Speakers Removing surround speakersPlaying Music What you will need Wall MountingRemove the template from the wall Drill pilot holes Sonos Playbar Customer Support Basic TroubleshootingPlaybar not detected during setup Identify an unused device keyProgram the unused device key Lock your remote control to the new volume commandsVerify that the problem is solved See Remote control setup on page 10 for help with this stepIf you are using another universal remote If you are using a Logitech universal remoteCan’t turn off TV speakers Turning Off Your Television’s SpeakersPlaybar Status Indicator State Additional Information Indicator Light ExplanationsProper Ventilation Important Safety InformationCleaning & Maintenance LocationHttp//support.directv.com Reference LinksSonos Playbar