Sonos PLAYBAR Indicator Light Explanations, Playbar Status Indicator State Additional Information

Page 30

28	Product Guide

Indicator Light Explanations

PLAYBAR Status Indicator	State	Additional Information
Solid white	Powered up and
	associated with a Sonos
	system
Solid green	Muted
Flashing white	Powering up (booting)
Flashing white and green	Not associated with a
	Sonos system
Flashing amber	Warning mode	The PLAYBAR is beginning to experience a fault condition and will reduce to
		75% volume.
		• Check the vent slot for adequate cooling
		• Check for speaker short circuit
		• Check the room temperature to make sure it’s less than 104°F/ 40° C
		• If the PLAYBAR is in direct sunlight, provide shade
		Mute and then unmute the Sonos component
		Unplug the PLAYBAR for several minutes to allow it to cool
Flashing amber and then white	Fault mode	If the fault condition (above) is not remedied, the Sonos component will
		automatically mute itself to prevent damage.

Image 30

Contents Sonos Playbar By Sonos, Inc. All rights reserved Sonos Playbartm What’s in the BoxHome network requirements What’s RequiredTelevision requirements Your home network must meet the following requirementsBefore You Begin Status Indicator Light Playbar FrontPlaybar Back Digital Audio In OpticalSelecting a Location TabletopWall mounting Setting Up the Playbar Product Guide Add the Sonos component that’s connected to your router If you are adding to an existing Sonos systemIf you’d like additional assistance Using a handheld Sonos controller Playbar SettingsRemote control setup Select Room Settings from the Settings menuClick Remote Control Setup Using the Sonos Controller for Mac or PCSelect Manage -Settings PC or Sonos -Preferences Mac Equalization EQRecalibrating the audio TV dialog settingsSelect Advanced Audio TV Dialog Settings Select Advanced Audio Recalibrate AudioTV autoplay Select TV Setup and Control TV AutoplayAdditional TV sound options Speech EnhancementSelect TV Setup and Control IR Signal Light IR signal lightSelect TV Setup and Control Ungroup on Autoplay Ungroup on autoplayWhite status light Select TV Setup and Control IR RepeaterIR repeater Select White Status LightChanging room names Adding a Sonos SUBSelect Room Name Placement Adjustment phase Select On or Off SUB settingsSelect Advanced Audio SUB Settings Removing a SUBSurround settings Surround SpeakersAdding surround speakers Removing surround speakers Select Remove Surround SpeakersPlaying Music Wall Mounting What you will needRemove the template from the wall Drill pilot holes Sonos Playbar Identify an unused device key Basic TroubleshootingPlaybar not detected during setup Customer SupportSee Remote control setup on page 10 for help with this step Lock your remote control to the new volume commandsVerify that the problem is solved Program the unused device keyIf you are using a Logitech universal remote If you are using another universal remoteTurning Off Your Television’s Speakers Can’t turn off TV speakersIndicator Light Explanations Playbar Status Indicator State Additional InformationLocation Important Safety InformationCleaning & Maintenance Proper VentilationReference Links Http//support.directv.comSonos Playbar

Product Guide

Indicator Light Explanations

PLAYBAR Status Indicator

State

Additional Information