Sonos Understanding the IR Remote Repeater and Status Light Functions for Systems

Page 17

SONOS PLAYBAR

15

IR repeater

When the PLAYBAR is placed in front of your TV on a tabletop, it may block the IR sensor on your TV. The IR repeater setting allows the PLAYBAR to repeat the signal to your TV. This setting is On by default.

Using a handheld Sonos controller

1.From the Settings menu, select Room Settings.

2.Select the room the PLAYBAR is located in.

3.Select TV Setup and Control -> IR Repeater.

4.Select On or Off.

Using the Sonos Controller for Mac or PC

1.Select Manage ->Settings (PC) or Sonos ->Preferences (Mac).

2.Select Room Settings if it is not already highlighted on the left.

3.Choose the room the PLAYBAR is located in from the Room Settings for drop-down.

4.Select the TV Setup tab.

5.Check the IR Repeater checkbox to turn this setting on, uncheck to turn it off.

6.Close the Settings window when changes are complete.

White status light

A white light displays on the side of the PLAYBAR to indicate that the unit is functioning in normal operation. If desired, you can turn this indicator light off so that when the PLAYBAR is in normal operation the white light does not display. This setting is On by default.

If the Status indicator light begins to flash amber, see "Indicator Light Explanations" on page 28 for additional information.

Using a handheld Sonos controller

1.From the Settings menu, select Room Settings.

2.Select the room you want to change.

3.Select White Status Light.

4.Select On or Off.

Image 17

Contents Sonos Playbar By Sonos, Inc. All rights reserved What’s in the Box Sonos PlaybartmTelevision requirements What’s RequiredHome network requirements Your home network must meet the following requirementsBefore You Begin Playbar Front Status Indicator LightDigital Audio In Optical Playbar BackWall mounting Selecting a LocationTabletop Setting Up the Playbar Product Guide If you’d like additional assistance Add the Sonos component that’s connected to your routerIf you are adding to an existing Sonos system Remote control setup Playbar SettingsUsing a handheld Sonos controller Select Room Settings from the Settings menuSelect Manage -Settings PC or Sonos -Preferences Mac Using the Sonos Controller for Mac or PCClick Remote Control Setup Equalization EQSelect Advanced Audio TV Dialog Settings TV dialog settingsRecalibrating the audio Select Advanced Audio Recalibrate AudioAdditional TV sound options Select TV Setup and Control TV AutoplayTV autoplay Speech EnhancementSelect TV Setup and Control Ungroup on Autoplay IR signal lightSelect TV Setup and Control IR Signal Light Ungroup on autoplayIR repeater Select TV Setup and Control IR RepeaterWhite status light Select White Status LightSelect Room Name Changing room namesAdding a Sonos SUB Select Advanced Audio SUB Settings SUB settingsPlacement Adjustment phase Select On or Off Removing a SUBAdding surround speakers Surround settingsSurround Speakers Select Remove Surround Speakers Removing surround speakersPlaying Music What you will need Wall MountingRemove the template from the wall Drill pilot holes Sonos Playbar Playbar not detected during setup Basic TroubleshootingIdentify an unused device key Customer SupportVerify that the problem is solved Lock your remote control to the new volume commandsSee Remote control setup on page 10 for help with this step Program the unused device keyIf you are using another universal remote If you are using a Logitech universal remoteCan’t turn off TV speakers Turning Off Your Television’s SpeakersPlaybar Status Indicator State Additional Information Indicator Light ExplanationsCleaning & Maintenance Important Safety InformationLocation Proper VentilationHttp//support.directv.com Reference LinksSonos Playbar