Turbo Chef Technologies 2020 Mode 3 Warming, Mode 4 Soaking, Mode 5 Cooking, Mode 6 Cooling Down

Page 19

Mode 3: Warming

Mode during which the oven warms to the preset cooking temperature defined by the cooking profile that was selected.

Happens When...

-A selection is made from mode 2, and the oven’s temperature at the beginning of warmup was not within (less than) 25°F (14°C) of the oven’s set temperature.

Goes To...

-mode 4 once the oven has reached the temperature defined by the selected cooking profile.

-mode 6 when the user presses the back/off key and the oven is above 150°F (66°C).

Mode 4: Soaking

Mode during which the oven has completed warming up and automatically allows an additional five minutes for the oven cavity surfaces to warm.

Happens When...

- mode 3 completes (within 5°F [3°C] of set point)

Goes To...

-mode 5 when soaking completes.

-mode 6 when the user presses the back/off key and the oven is above 150°F (66°C).

Mode 5: Cooking

Mode during which the oven is ready to cook. The user can place food on the conveyor to cook, or edit cook settings if the full edit or flex option is enabled. See page 12 for more information on full edit and flex options.

Happens When...

-mode 4 completes.

-The user presses the idle key, up key, down key, or any soft key during mode 7.

Goes To...

-mode 6 when the user presses the back/off key.

-mode 7 when the user presses the idle key.

-mode 3 if the temperature drops 25°F (14°C) or more below the set point.

11

Mode 6: Cooling Down

Mode during which the burner assembly shuts off to allow the oven to cool.

Happens When...

-The user presses the back/off key from mode 3 (and the oven temperature is above 150°F [66°C]), or from modes 4, 5, or 7.

Goes To...

-mode 1 when the oven temperature has receded below 150°F (66°C).

-mode 2 when the user selects a cooking profile.

Mode 7: Idle

Mode during which both blowers are reduced to 30% and the belt speed reduces to 15 minutes to save power. All other oven components remain the same.

If the Idle key is pressed once, a timer begins that is twice as long as the longest belt speed time in the menu (not necessarily the one currently selected to cook), after which the oven goes into Idle mode.

To immediately enter Idle mode, press the Idle key twice.

Happens When...

-The user presses the idle key from mode 5.

Goes To...

-mode 5 when the user presses the idle key, up key, down key, or any soft key.

-mode 6 when the user presses the back/off key.

dr Standa nev O erpationO

Image 19 Contents
For the turbochef high h conveyor 2020 and 2620 ovens Page For further information, call Page Table of Contents Oven Modes General Safety Information Important Safety Information Please Read FirstGrounding Instructions Power Cord ReplacementReducing Fire Risk Preventing Oven DamageConveyor HhC 2020 DimensionsElectrical Specifications ExteriorSpecification and Installation HhC 2620 DimensionsConstruction Installation InstructionsPackaging CertificationsVentilation Requirements Installation Near Open Heat SourceApproved cleaner, part number Daily Cleaning InstructionsRemove Outer Oven Components Weekly Cleaning Instructions Remove Inner Oven Components Clean Oven Components Verify Chain Tension Replace Oven ComponentsOven Controls Mode 2 Belt Speed Select Mode 1 Oven OffCooking Mode 6 Cooling Down Mode 3 WarmingMode 4 Soaking Mode 5 CookingChanging a Cooking Profile Name Editing a Cooking ProfileAdjusting the Temperature Adjusting the Belt SpeedAdjusting the Top and Bottom Air Smart Card Screen Loading a Menu Config ModeSetup Mode Accessing the Setup ModeEdit Options Screen Changing the Display TemperatureChanging the Speaker Volume Changing the Belt DirectionInfo Screen Updating the FirmwareIssue Possible Causes Resolution TroubleshootingTroubleshooting Part Description Replaceable PartsNorth America Limited Warranty Warranty Service, Exclusive Remedy Disclaimer of Damages International Limited Warranty Warranty Service Er Intnational de y Limitantrra W International Limited Warranty NationalerntI De yimitL antrra W For service or information
Related manuals
Manual 76 pages 13.28 Kb