Turbo Chef Technologies 2620, 2020 owner manual Config Mode, Accessing the Setup Mode

The config mode (Figure 16) serves four main purposes:

1.To access the smart card screen.

2.To access the fault count screen.

3.To access the setup mode.

4.To access the test mode (service use only).

To access the config mode, press the up key from the oven off mode.

From the config mode (Figure 16), press R1 to access the fault counts screen (Figure 20, page 15). The oven will display the number of faults that have occurred.

Accessing the Setup Mode

From the config mode (Figure 16), press L1 to access the setup mode. The setup mode allows the user to customize several oven settings - see below for more details.

Smart Card Screen (Loading a Menu)

The smart card screen allows the user to -Load a menu from smart card to oven. -Save a menu from oven to smart card.

To load or save a menu,

1.Press L3 (Figure 16) to access the smart card screen (Figure 17).

2.Insert a smart card into the smart card slot (Figures 18 and 19), with the gold chip facing the front of the oven.

3.Load or save a menu.

-Press R1 to load a menu from the smart card to the oven (Figure 17).

-Press R2 to save a menu from the oven to the smart card (Figure 17).

Figure 16: Config Mode

Setup Mode

Figure 21, page 15.

The setup mode serves four main purposes:

1.To change the display temperature.

2.To access the edit option screen.

3.To change the display language.

4.To access the info screen.

To access setup mode, press the up key from the oven off or cooling down mode (to access the config mode), and then press L1.

Figure 18: Loading a Smart Card