Turbo Chef Technologies 2620, 2020 owner manual Updating the Firmware, Info Screen

Page 24

16Oven Modes

Info Screen

The info screen (Figure 24, page 15) is used to display the following information in an easy to access place:

-Serial number

-Electrical compartment temperature

-Voltage

-Total time the oven has been on

-Total time the oven has been idle

-Firmware version

To access the info screen, press R3 within the setup mode (Figure 21).

Updating the Firmware

From the oven off screen,

1.Insert the gray smart card (see Figure 18, page 14) with the gold chip facing the front of the oven. If multiple smart cards are required, they will be labeled in sequence - ensure the correct sequence is followed.

2.From the cooling down or oven off mode, press and hold the idle key until the oven resets (approximately 5 seconds). The display will go blank until the upload is complete.

3.When the oven beeps one long high tone, the load was successful. If a second card was provided, insert it and repeat steps 1-3.

4.Remove the smart card from the oven. The oven will restart.

NOTE: If the update is unsuccessful, the display will remain off and the oven will beep one long, low tone. If this occurs, repeat the above procedure. If the update fails multiple times, a smart card may be damaged. Please note that the oven will be inoperable until a successful update is performed. As such, TurboChef reinforces proper handling of smart cards to help prevent static damage, and recommends that each service technician keep a backup copy.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents For the turbochef high h conveyor 2020 and 2620 ovens Page For further information, call Page Table of Contents Oven Modes Important Safety Information Please Read First General Safety InformationPower Cord Replacement Reducing Fire RiskPreventing Oven Damage Grounding InstructionsHhC 2020 Dimensions Electrical SpecificationsExterior ConveyorHhC 2620 Dimensions Specification and InstallationInstallation Instructions PackagingCertifications ConstructionInstallation Near Open Heat Source Ventilation RequirementsDaily Cleaning Instructions Approved cleaner, part numberWeekly Cleaning Instructions Remove Outer Oven ComponentsRemove Inner Oven Components Clean Oven Components Replace Oven Components Verify Chain TensionOven Controls Mode 1 Oven Off Mode 2 Belt Speed SelectCooking Mode 3 Warming Mode 4 SoakingMode 5 Cooking Mode 6 Cooling DownEditing a Cooking Profile Changing a Cooking Profile NameAdjusting the Belt Speed Adjusting the TemperatureAdjusting the Top and Bottom Air Config Mode Setup ModeAccessing the Setup Mode Smart Card Screen Loading a MenuChanging the Display Temperature Changing the Speaker VolumeChanging the Belt Direction Edit Options ScreenUpdating the Firmware Info ScreenTroubleshooting Issue Possible Causes ResolutionTroubleshooting Replaceable Parts Part DescriptionNorth America Limited Warranty Warranty Service, Exclusive Remedy Disclaimer of Damages International Limited Warranty Warranty Service Er Intnational de y Limitantrra W International Limited Warranty NationalerntI De yimitL antrra W For service or information
Related manuals
Manual 76 pages 13.28 Kb

2020, 2620 specifications

Turbo Chef Technologies 2620,2020 is a revolutionary cooking appliance that merges advanced technology with user-friendly operation. Designed for commercial kitchens, it stands out as a versatile solution for various cooking methods, meeting the demands of fast-paced environments while ensuring consistent results.

One of the main features of the Turbo Chef 2620 is its innovative cook technology that incorporates a combination of convection, microwave, and radiant heat. This tri-technology system allows food to be cooked quickly and evenly, which not only saves time but also enhances the quality of the final product. The appliance employs a patented air impingement system, ensuring that heat circulates uniformly around the food. This results in crispy exteriors and moist interiors, making it ideal for items like pizza, baked goods, and meats.

In addition to its cooking capabilities, the Turbo Chef 2620 is equipped with a user-friendly digital control panel. The intuitive interface allows for easy programming and access to a variety of cooking presets, making it accessible even for inexperienced staff. Operators can store multiple cooking profiles, streamlining operations and improving efficiency. The appliance also features a robust construction, built to withstand the demands of high-volume use, ensuring durability and longevity in busy kitchen settings.

Another significant characteristic of the Turbo Chef 2620 is its energy efficiency. The appliance is designed to minimize energy consumption without sacrificing performance, making it an environmentally friendly choice for commercial kitchens. Its compact size allows for flexible placement, making it suitable for establishments with limited space.

Furthermore, the Turbo Chef 2620 ensures food safety and ease of maintenance. The appliance's design includes removable components that facilitate easy cleaning, while essential safety features protect users during operation.

Overall, Turbo Chef Technologies 2620,2020 is a groundbreaking appliance that offers an impressive array of features and technologies for modern cooking needs. With its advanced cooking capabilities, user-friendly operation, energy efficiency, and robust design, it represents an ideal solution for any commercial kitchen looking to enhance productivity while maintaining high food quality.
Top Page Image Contents