L1 |
| FAULT | COUNTS | R1 | |
| F1: 0 |
| F6: 0 | ||
|
| F2: 0 |
| F7: 0 |
|
L2 |
| F3: 0 |
| F8: 0 | R2 |
| F4: 0 |
| F9: 0 | ||
L3 |
| F5: 0 |
| F10: 0 | R3 |
|
|
|
| ||
|
|
|
| ||
Figure 20: Fault Counts Screen |
|
|
| ||
|
|
|
|
|
|
L1 | DEGS F |
|
| ENGLISH | R1 |
L2 | BELT | R2 | |||
L3 | EDIT/RIGID/FLEX |
| INFO | R3 | |
|
|
|
| ||
Figure 21: Setup Mode |
|
|
| ||
|
|
|
|
|
|
L1 | 1 |
|
| 4 | R1 |
|
| ENTER PASSWORD |
| ||
L2 | 2 | <6633> | 5 | R2 | |
|
| ||||
L3 | 3 |
|
| 6 | R3 |
|
|
|
| ||
Figure 22: Password Screen |
|
|
| ||
|
|
|
|
| |
L1 | NAME: FULL |
| TEMP: FLEX | R1 | |
L2 |
| EDIT MODES | R2 | ||
| SELECT | ||||
L3 | BELT: RIGID |
| AIR: FLEX | R3 | |
|
|
|
| ||
Figure 23: Edit Option Screen |
|
|
| ||
|
|
|
|
|
|
L1 |
| INFO |
|
| R1 |
SERIAL_NUMBER |
| RUN: 65432 HR | |||
|
|
| |||
L2 | EC=82F 208V |
| IDLE: 12345 HR | R2 | |
|
|
|
| ||
L3 |
| SOFTWARE VERSION | R3 | ||
|
|
|
| ||
|
|
|
|
|
|
Figure 24: Info Screen
15
Changing the Display Temperature
The oven can display the temperature in either Celsius or Fahrenheit units. To change the display temperature, press L1 in setup mode (Figure 21).
Changing the Belt Direction
The oven’s belt(s) can travel from left to right or right to left. To change the belt direction, press L2 in setup mode (Figure 21).
Edit Options Screen
The edit options screen (Figure 23) allows the user to switch between full edit, rigid, and flex options for profile name, belt speed, temperature, and % air. For more information on the different edit options, see Editing a Cooking Profile on page 12.
To access the edit options screen,
1.Press L3 (Figure 21) to access the password screen (Figure 22).
2.Input the password 6 6 3 3 by pressing the soft keys adjacent to the numbers.
To change the edit option (Figure 23),
-Press L1 to select full edit or rigid for the profile name.
-Press L3 to select full edit, rigid, or flex for the belt speed.
-Press R1 to select full edit, rigid, or flex for the profile cook temperature setting.
-Press R3 to select full edit, rigid, or flex for the % air setting.
Changing the Speaker Volume
Press R2 (Figure 21) to change the volume of the speaker. The volume can be set to either 0, 1, 2, or 3 (where 0 is mute and 3 is the loudest setting).
nevseO odM